Stihl 034 or 036 ? Super ?

Wood Doctor

Wood Doctor

Edwin
Joined
Jan 10, 2008
Messages
11,702
Location
Omaha, Nebraska
The 034 Super also has a smaller air filter and carb box cover. The 036 air filter will not even fit inside the 034 carb box cover So, all OP has to do is check the air filter and see if it looks like this:
1614365736234.png
 
  • Like
Reactions: TBS
Vintage Engine Repairs

Vintage Engine Repairs

Addicted to ArboristSite
Joined
Aug 12, 2019
Messages
3,661
Location
Australia
Hey guys,

Well I measured the piston and it is 48mm. The muffler is hinged with only 2 lower bolts and a cheese greater front as well. However I did not check the top of the cylinder, I will do that tomorrow.

So with everyone's help I think we have established that it I have a 034 Super. Now I am very happy. But I will get images tomorrow.

Justin
Nice Justin, I recently completed a full rebuild on one. They are a lovely saw!
 
ozziechainsaw

ozziechainsaw

ArboristSite Operative
Joined
Feb 9, 2020
Messages
350
Location
Cairns Nth Qld Australia
Hi Guys,

As promised photos of the 034 Super.

It has the cheese grater exhaust, 48mm piston but it has a Zama carby. I close friend of mine has another 034 Super but his has a Tilloston carby.
I have a IPL for the 034 and it lists, 3 different carby's for the 034, but shouldn't all the Supers have the same carby ? Why would my 034 Super have a Zama and my mates a Tilloston ?

Cheers

Justin
 

Attachments

  • 20210227_204736.jpg
    20210227_204736.jpg
    2 MB · Views: 22
  • 20210227_204721.jpg
    20210227_204721.jpg
    1.4 MB · Views: 23
  • 20210227_204636.jpg
    20210227_204636.jpg
    3.3 MB · Views: 25
  • 20210227_204620.jpg
    20210227_204620.jpg
    1.6 MB · Views: 29
drf255

drf255

BAD CAD
Joined
Nov 3, 2014
Messages
4,113
Location
Socialists Republic of New York
That’s a super. You need and airfilter.

Different years came with different carbs, I think that’s it. I’ve had Original 034S that came both ways. Nothing wrong with the Zama’s, those are non EPA ones and generally good carbs with bigger jetting. Zama came form Japan or China back then.

Not sure who pryed your muffler up like that.
 
drf255

drf255

BAD CAD
Joined
Nov 3, 2014
Messages
4,113
Location
Socialists Republic of New York
I’ve never seen a Mahle 034S jug on any production saw. I do have an NOS one in a box.

It has 036 ports with a short second exhaust fin. I believe it to be a transition jug before the 036 and never used on a production saw.

By “036 ports” I mean an arched exhaust roof and a teardrop intake which is like the 036 and nothing like the KS 034S jug.
 
ozziechainsaw

ozziechainsaw

ArboristSite Operative
Joined
Feb 9, 2020
Messages
350
Location
Cairns Nth Qld Australia
I’ve never seen a Mahle 034S jug on any production saw. I do have an NOS one in a box.

It has 036 ports with a short second exhaust fin. I believe it to be a transition jug before the 036 and never used on a production saw.

By “036 ports” I mean an arched exhaust roof and a teardrop intake which is like the 036 and nothing like the KS 034S jug.
Attached is a photo from my mate 034 Super. His cylinder looks darker.

It's not the best photo taken but it's the only image I have.

Justin
 

Attachments

  • 635420504.jpg
    635420504.jpg
    967.1 KB · Views: 15

5155

ArboristSite Member
Joined
May 5, 2019
Messages
54
Location
pa
I been watching also.
Have a regular 034 open at this time.
Can someone direct me to
Tom @Guadaost did on his 034S post?

Thanks, I stink at navigation on here.
 
DND 9000

DND 9000

Addicted to ArboristSite
Joined
Sep 11, 2012
Messages
1,199
Location
Germany
This is the thread from Tom, easily found with a little search here:
 
Top