I have a stihl 045 av that I purchased to fix up. I removed the points and condenser. I installed an ignition chip. Tested the saw for spark before I started to put all back together. With no carb installed and a little mix it fired up in two pulls. So I put all back together. I put a new carb kit in and I couldn't get it to fire. So I ordered a new spark plug as a thought. Still no luck. Compression is good. I even tried to add a little mix to the motor. Still absolutely nothing. I am so confused because I got it to fire up with no carb on and now all new stuff. No luck. Hope someone can help. Thanks in advance.