• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl 461

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 7, 2013
Messages
879
Reaction score
796
Location
Eastern OK
Very nice 461. Built this saw mostly by buying new oem parts in small batches at my local Stihl dealer over about ayear (not the most economical way to build a saw! Trust me!). But I enjoyed the project of acquiring all the parts and thoroughly enjoyed putting it together). Every single piece on this saw is oem except for the Bark box muffler cover. Used parts: crankcase, oil pump (high output 461R pump), muffler can, fuel tank (very lightly used), carb (with new kit in it). New oem parts I bought: crankshaft, crankshaft bearings, piston/cylinder kit, seals, and all the plastics, filters, and intake parts. Pressure/vac tested and put together with meticulous care. Saw runs like a top! Idles, cuts and oils like a brand new one. I've got the oiler set to run a full tank of oil with a full tank of fuel. Comes with a new 32" Tsumura Light and Tough bar and 105 link chain. $1000 and you pay shipping. Selling to fund the purchase of a bmx cruiser so I can ride with my son at the local bmx track.
 

Attachments

  • 20220510_214048.jpg
    20220510_214048.jpg
    2.9 MB · Views: 1
  • 20220510_214059.jpg
    20220510_214059.jpg
    3 MB · Views: 1
  • 20220510_214109.jpg
    20220510_214109.jpg
    3.7 MB · Views: 1

Latest posts

Back
Top