• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Stihl cylinders, handles, crankcases, 064 parts, 044 parts, 025 parts, ms362 parts & more

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
More parts. 056 muffler casing and shell are good but the dual port cover has a crack and some rust. 064 cover has a small chunk taken out above the spark plug hole but is otherwise good. Everything else although a little dirty is in good shape and is undamaged. Both ms461 covers are missing the top captive nut. 044 top cover is really nice, a little grime but no damage.

056 Dual port muffler Sold
(2) MS461 top covers $15 each
044 filter base Sold
044 Mag filter cover $15
044 top cover Sold
(5) 064 filter cover(old metal style) $10 each
064 top cover Sold
MS311/391 Top cover $25
046/ms460 Top cover Sold
046 flywheel Sold
046 filter base Sold
132951a593d25d70a2a812b90a1dc0c8.jpg
064b8c804b19f404144488d409e8440d.jpg
06e468fdd5194d58acf9d6762a3999d7.jpg
32f5effff99634e8539ec280abf98ec6.jpg
db638c0992b7b2f87aa7aeef0604d7d7.jpg
928dfc622693373b6727b6e0fe001301.jpg
7af3d42f8f07460708cd75da23efdab2.jpg
e99ab9220d82002f1207339ff7b4f196.jpg
6542673b45a37e391f11adc1c60a09a5.jpg
17f807f46f8324cdb0c21d7ccc2e1b5d.jpg
a1b87b42975535d0f2b89cd769e7a4ab.jpg
7000cf1e75ad7486b0f2cc69efc694ba.jpg


Sent from my SM-N970U using Tapatalk
 
From an early version ms362 with the older flat type air filter. Serial 289894395

Ms362 air guide shroud part # 1140 120 0901 $10
Ms362 carb bracket part # 1140 120 0901 $5
Ms362 manifold part # 1140 140 2500 $10
4d3ff46814c704c9b3ffca36495f6ec4.jpg
beda89886ef5b9fa8b318abca6d8293f.jpg
4e727b0fb6d7f2e290fb60db6106b8f9.jpg


Sent from my SM-N970U using Tapatalk
 
Need folks input here. I have an old KS piston for an 064 but it's beat up a little. Skirts seem good but the top has some wear and a few dings from the saw ingesting something. All that aside piston to Cylinder wall clearance is only .003 and that was tested on a very used 064 cylinder. Ring grooves are also good. Theres a scuff on exhaust side but I can't catch anything with my fingernail. Still I don't think I would personally want to use it. Would you guys use something like this or does it belong in the recycle bin?
8fc9f5d6933da6ef59b821c6570edfb5.jpg
9c6e7f50bb0d95addae5290d26abb098.jpg
e19531f9838afb2edb1ec79e90bdbc60.jpg
81ae7df9a0cd55b5f0bda4a743b62beb.jpg


Sent from my SM-N970U using Tapatalk
 
Some carbs to add. One is a new old stock Bing 49 for the 064. Two Walbro carbs for 064/066 are good but probably need a kit or cleaning. 044 walbro carb is in good used shape. 044 Zama carb is also in good shape and ready to go, passed pressure/leakage test. Chinese carb is for 1128 series saws. All the ms250 carbs and ms170 carb will need kits. One of the ms250 carbs has the fixed high jet.

064/066 Carbs
Bing 49 Nos. $75
Walbro WJ-6A Sold
Walbro WJ-10A Sold

044 & MS440 carbs
Walbro HD-17A $35
Chinese no name New. $10
Zama C3M-S5G. $35

MS250
Walbro WT-283B. $10
Walbro WT-215. $10
Zama C1Q-S75B. $10

MS170
Zama C1Q-S57E. $5
a273bfd5eb0dea93a6dbdd2ea06e88a4.jpg
530410ff43edc7fe6d429c50c90dee24.jpg
4d2e7df8267a07905e1cef8c4c184f1e.jpg
756f580a1b896ec8ccf0bb5681a0c949.jpg
0e3855b3a4a2139e0e91bd058799bee2.jpg
fbc7760a5a45fe84ad71b97a9474b316.jpg
9d3c1b5144abff69e67e18905505faa5.jpg
5c6b96def33d96a301e8af816b023785.jpg
b10c0f4ecfa22ef18382a0b7091c65d5.jpg
72e1c5773f3e813bc8df17bc84b12eb4.jpg
1af7f8687cfcecf496fb03eb4484aef6.jpg


Sent from my SM-N970U using Tapatalk
 
044 part out. All of it is sold.

Piston(12mm) & Cylinder Set Sold
Complete Starter Sold
Brake handle Sold
Oil pump Sold
Flywheel Sold
Coil Sold
Coil(without spring+boot) Sold
Top cover Sold
Fuel tank Sold
Spike set Sold
Clutch w/ washer Sold
Clutch Drum w/ small parts Sold
Worm gear Sold
Brake band Sold
Crank 12mm Sold
Muffler Sold
Brake tension spring Sold
ee66bb192566d5a2d7078008c858a914.jpg
2c9db9c0948da0db273e7174c1ddedf9.jpg
7ecb77e7725415e17d997efdeba7f010.jpg
7f9f3878bbcea7413a9927b6898674ab.jpg
2ffa4b5143d0967de1b9ea1cbd92bf8f.jpg
11bfb21928aaee3e96d7ced11ebab898.jpg
c5c6ee7940d07b42ae999f951abbc957.jpg
4a4641e947b2a21a766483f7bb45c8ca.jpg
7a52bcfcec95d667ddddc53939060539.jpg
fb596e3884c5b9e49a727e7240399c45.jpg


Sent from my SM-N970U using Tapatalk
 
Do you have a Stihl MS362 rear handle/fuel tank?
Also need all top plastics as well as loop handle
 
Pretty sure I can get a fuel tank next week. I don't think I have the plastics either but could also get those next week. I may have a half wrap handle, I'll have to check. Looks like I should update this thread too!

Sent from my SM-N970U using Tapatalk
 
So since I can't go back and edit any of the older posts I will list out what is still available from the pile. All of the MS362 parts are still here, the 025 plastics and cylinder, an 044 starter, and the MS461 piston. The post with the carbs also seems to be correct which includes the new old stock Bing 49 carb for the 064. I am flexible on price too so if it seems too high then make on offer. The most I can do is say no or tell you to G*F*Y*. :)
 
Wondering if you might have some smaller cc parts saws. 028 woodboss WB, 028 AV Super, 024 super.
If you have any huskies, I need a 262 ks cylinder and a HDA 87 carb, a piston for a 254xp, and let me know if you have any echoes please.
 
Wondering if you might have some smaller cc parts saws. 028 woodboss WB, 028 AV Super, 024 super.
If you have any huskies, I need a 262 ks cylinder and a HDA 87 carb, a piston for a 254xp, and let me know if you have any echoes please.
No sorry no 028 or 024 parts. I have some 266 cylinders but no 262 or 354.

Sent from my SM-N970U using Tapatalk
 

Latest posts

Back
Top