• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl MS250 clutch salvage parts needed.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Okie

Addicted to ArboristSite
AS Supporting Member.
Joined
Mar 7, 2015
Messages
2,179
Reaction score
1,858
Location
Oklahoma (USA)
Previous people working on this MS250 lost the following pieces of the MS250 clutch area parts and I'm repairing the saw for myself..

I have the 18 inch 11 teeth bar roller tip stihl bar and 67DL, .063 gauge chain with a 6 stamped on the DL's which appears to indicate a .063 gauge chain. (looking at a Stihl chain ID guide sheet)



Which clutch drum do I need, 7 or 8 teeth? prefer a 7 tooth sprocket clutch drum (and bearing) but will take whatever I can get, 7 or 8 tooth or a rim sprocket for my exiosting chain

I'm missing the following parts at the MS250 clutch area. I have the centrifugal clutch assembly 1123 160 2050 (I would be interested in the following used parts if anyone has such or the majority of such)

clutch drum and bearing, (for the above chain pitch)
cover washer (that is behind the centrifugal clutch) 1121 162 1001
E clip 9460 624 0801 (8 x 1.3) and it's associated washer (27mm) 9512 933 2260
 
Previous people working on this MS250 lost the following pieces of the MS250 clutch area parts and I'm repairing the saw for myself..

I have the 18 inch 11 teeth bar roller tip stihl bar and 67DL, .063 gauge chain with a 6 stamped on the DL's which appears to indicate a .063 gauge chain. (looking at a Stihl chain ID guide sheet)



Which clutch drum do I need, 7 or 8 teeth? prefer a 7 tooth sprocket clutch drum (and bearing) but will take whatever I can get, 7 or 8 tooth or a rim sprocket for my exiosting chain

I'm missing the following parts at the MS250 clutch area. I have the centrifugal clutch assembly 1123 160 2050 (I would be interested in the following used parts if anyone has such or the majority of such)

clutch drum and bearing, (for the above chain pitch)
cover washer (that is behind the centrifugal clutch) 1121 162 1001
E clip 9460 624 0801 (8 x 1.3) and it's associated washer (27mm) 9512 933 2260
I’m thinking it could be a 68 tooth chain .325 sprocket. That is the norm usually. I probably have everything. Can ya double check & see if it’s a .325? The .063 is usually the .325 instead of the 3/8 picco stuff.
 
I counted the DL's 3 times as 67. (I also seen most are 68DL) and I noticed that the bar adjuster is all the way in for the 67DL shorter chain.
I used calipers and measured the gauge as .063 and the 6 stamped on the DL is 6mm which is .063 inches.

Therefore all is .325 going by the process of elimination. The bar and chain looks ok.

I'm missing the following parts:

Big plate steel cover washer that goes behind the centrifugal clutch 1121 162 1001

clutch drum and cage bearing (prefer 7 tooth) A rim type clutch cover with bearing and rim would be ok.

E clip and it's associated washer.

I could also use a air filter 1123 120 1612 (one of the plastic ears on mine is broke off)
and a throttle rod 1123 182 1505


I've got the saw all apart waiting on new Nachi crankshaft steel bearing and seals. (the plastic ball bearing separator on one bearing broke and plastic pieces was making the bearing roll rough)

Good useable parts are ok.

Shipping would be to zip 74346 in Oklahoma. I have a paypal account.
 
9666846F-00B3-429C-B0C5-F1115905615B.jpeg
I counted the DL's 3 times as 67. (I also seen most are 68DL) and I noticed that the bar adjuster is all the way in for the 67DL shorter chain.
I used calipers and measured the gauge as .063 and the 6 stamped on the DL is 6mm which is .063 inches.

Therefore all is .325 going by the process of elimination. The bar and chain looks ok.

I'm missing the following parts:

Big plate steel cover washer that goes behind the centrifugal clutch 1121 162 1001

clutch drum and cage bearing (prefer 7 tooth) A rim type clutch cover with bearing and rim would be ok.

E clip and it's associated washer.

I could also use a air filter 1123 120 1612 (one of the plastic ears on mine is broke off)
and a throttle rod 1123 182 1505


I've got the saw all apart waiting on new Nachi crankshaft steel bearing and seals. (the plastic ball bearing separator on one bearing broke and plastic pieces was making the bearing roll rough)

Good useable parts are ok.

Shipping would be to zip 74346 in Oklahoma. I have a paypal account.
Is this all ya need?
 

Latest posts

Back
Top