• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl MS440 with MS460 cylinder

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jan 4, 2016
Messages
187
Reaction score
290
Location
U.S.
For sale is a Ms440 that has a MS460 cylinder adapted to it. The intake and transfers have been mildly ported. The exhaust port was left alone it was just finished with 100 grit emery clothe. The work is not extreme so it starts and idles great. It starts with a couple pulls and cuts great. This 440 runs on pump gas 50:1 mix but a VP style small engine fuel is recommended. The cylinder is OEM the piston is a Meteor with caber rings. Also, the case has been split and the bearings and seals were replaced. So, this machine will have lots life in it. If you have any questions just ask I am asking $550 plus the shipping
 

Attachments

  • 20230531_140219.jpg
    20230531_140219.jpg
    1.7 MB · Views: 4
  • 20230531_140235.jpg
    20230531_140235.jpg
    1.6 MB · Views: 1
  • 20230531_140320.jpg
    20230531_140320.jpg
    3.1 MB · Views: 1
  • 20230531_140326.jpg
    20230531_140326.jpg
    1.7 MB · Views: 1
  • 20230531_140352.jpg
    20230531_140352.jpg
    1.6 MB · Views: 0
  • 20230531_140545.jpg
    20230531_140545.jpg
    1.5 MB · Views: 1
  • 20230531_140959.jpg
    20230531_140959.jpg
    681.3 KB · Views: 0
For sale is a Ms440 that has a MS460 cylinder adapted to it. The intake and transfers have been mildly ported. The exhaust port was left alone it was just finished with 100 grit emery clothe. The work is not extreme so it starts and idles great. It starts with a couple pulls and cuts great. This 440 runs on pump gas 50:1 mix but a VP style small engine fuel is recommended. The cylinder is OEM the piston is a Meteor with caber rings. Also, the case has been split and the bearings and seals were replaced. So, this machine will have lots life in it. If you have any questions just ask I am asking $550 plus the shipping
 
For sale is a Ms440 that has a MS460 cylinder adapted to it. The intake and transfers have been mildly ported. The exhaust port was left alone it was just finished with 100 grit emery clothe. The work is not extreme so it starts and idles great. It starts with a couple pulls and cuts great. This 440 runs on pump gas 50:1 mix but a VP style small engine fuel is recommended. The cylinder is OEM the piston is a Meteor with caber rings. Also, the case has been split and the bearings and seals were replaced. So, this machine will have lots life in it. If you have any questions just ask I am asking $550 plus the shipping
What’s is that a 20” bar PM me we will figure something out
 
Back
Top