• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl saws and parts

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jsmith40004

ArboristSite Operative
Joined
Jul 17, 2006
Messages
158
Reaction score
86
Location
bardstown, kentucky
Came up with some old under the shelf parts and saws I'm wanting to sell.

1) 031av complete, has good compression $50
2) 056 mag 2 carcass turns and has good compression by hand $30
3) 051? Carcass again good compression by rolling with hand $25
4) 2-mahle 066 cylinders, not scored but one has some broken fins and both have had the exhaust port lightly ground on $25 for both
5) 066 stihl cylinder, again lightly ground but no scoring $25
6) 044 mahle cylinder and piston, no scoring on either $50

More parts to come later

Thanks
James
 

Attachments

  • 20210610_191533.jpg
    20210610_191533.jpg
    2.5 MB · Views: 46
  • 20210610_191519.jpg
    20210610_191519.jpg
    2.2 MB · Views: 52
  • 20210610_191524.jpg
    20210610_191524.jpg
    2.4 MB · Views: 48
  • 20210610_191827.jpg
    20210610_191827.jpg
    1.4 MB · Views: 42
  • 20210610_192013.jpg
    20210610_192013.jpg
    1.2 MB · Views: 37
I sure will but have no clue what all is there. A retired logger gave me this stuff as partial payment for fixing a dozer for him. I have no where to store any of it
Sounds like me, too much stuff but not enough room. I’m sure me and other members here have no problem helping you get rid of some of the stuff lol
 
Yeah I want everyone to have a good price with shipping being as high as it is. I'm not looking to make much on any of it. That's why I don't bargain down, take the price or leave it.

The 031 is a complete saw with 16" bar and chain. I put a little splash of fuel through carb and it fired. I just can't guarantee anything about it, and not interested in fooling with it.

I work a 7 day a week job and this model has never done anything for me. If it was a pioneer I'd show it some attention

James
 
Came up with some old under the shelf parts and saws I'm wanting to sell.

1) 031av complete, has good compression $50
2) 056 mag 2 carcass turns and has good compression by hand $30
3) 051? Carcass again good compression by rolling with hand $25
4) 2-mahle 066 cylinders, not scored but one has some broken fins and both have had the exhaust port lightly ground on $25 for both
5) 066 stihl cylinder, again lightly ground but no scoring $25
6) 044 mahle cylinder and piston, no scoring on either $50

More parts to come later

Thanks
James
Ok. Guess I'll have to take the 031 off you. Could really use some 075 parts if available.
 
Back
Top