Timbersport Portable Spring Board Chopping Stand

[SSWaters]

Made this for the SAWA Axemen;

Each leg is around 60 lbs (4 legs total)
Shown with only 4 lags in each plate, 6 1/2" holes in the plate
(impact gun these in or ratchet)
Adjusters at end to preload slightly
Shim under log and at base of bend with wood as required to stiffen more

 

[troutfisher]

Made this for the SAWA Axemen;

Each leg is around 60 lbs (4 legs total)
Shown with only 4 lags in each plate, 6 1/2" holes in the plate
(impact gun these in or ratchet)
Adjusters at end to preload slightly
Shim under log and at base of bend with wood as required to stiffen more

That is a very nice setup! Thanks for posting that!

 

[SSWaters]

3rd set going out, got behind on other stuff.

$500 plus local tax and shipping for 4 legs. (60lbs a leg)

$150 plus local tax and shipping for 1 leg and you copy to make 3 more.

Moderators if you have an issue with me listing prices let me know and I'll remove this post or you can.

Scott

 

[SSWaters]

Design change, price went up a bit as of today, edited below;

3rd set going out, got behind on other stuff.

$550 plus local tax and shipping for 4 legs. (60lbs a leg)

$160 plus local tax and shipping for 1 leg and you copy to make 3 more.

Moderators if you have an issue with me listing prices let me know and I'll remove this post or you can.

Scott

 

[SSWaters]

Matt Slingerland on stand;

Buckets are over adjusters at the ends.

 

[SSWaters]

Pics got dumped, reposting for you to view, copy, buy or whatever advances the sport.

 

[SSWaters]

I'm guessing you could dawg the chopping log on the spring board stand and use it as a standing block stand also? Probably a tad to tall and the legs would be in the way?

My standing block stand for comparison;