SteveSr
Addicted to ArboristSite
Before you toss the old coil you might want to replace the HT lead and plug boot if it is damaged / cracking. The existing wire should just unscrew. Also replace the boot on the coil tower if needed.well, you were close, I did swap the plugs and didnt fix it. but, .I am happy to report that I swapped the ignition coil out and it started right up and ran strong. The spark that I was getting was too weak, the wire had a bad spot on it and the coil from parts saw fixed all the problems. thanks for all the ideas, they were helpful. I was thinking it was the vacuum but this is much easier, i now need to decide to get and OEM coil or aftermarket.