Tsumara bar on a Husky

Help Support ArboristSite:

Ittybittyfitty

Ittybittyfitty

ArboristSite Operative
Joined
Jul 27, 2020
Messages
100
Location
Michigan
Newb questions here. I'm looking at getting my first Husqvarna, a 372xp OE. It will be PHO, so I will need a B&C. I was hoping to get a Tsumara light and tough bar, and it looks like they have .050 and .058 gauge bars for that application. I believe the 372xp comes set up to run 3/8 .058 chain?

Most of my saws are Stihls so I have quite a bit of 3/8 .050 chain. My question is can I run the .050 Tsumara bar and .050 chain on the 372xp without modification? If so, can I use my Stihl chain as well? It looks like for a 20" bar on both brands they each have 72 drivers.

Thanks Gentlemen
 
Whiskers

Whiskers

Addicted to ArboristSite
Joined
Jul 27, 2011
Messages
1,412
Location
Nebraska
Yes, as long as the drive link count matches or you’ve got enough adjustment. I believe stihl 20” bar is 72dl, not sure what the Tsumura husky bar is.
 
Ck0461

Ck0461

ArboristSite Operative
Joined
Sep 7, 2012
Messages
145
Location
East
3/8th drive sprockets don’t care what gauge, just match the chain gauge to the bar, run a 050 bar and chain if you’d like.
 

Latest posts

Top