Supercharged86
ArboristSite Operative
I have several Vintage Homelite saws for sale, over 10 in total, including a VERY rare 1970 E-Z 250 Automatic, Homelite-Terry Super Mini SL's, Super EZ's and DM-50's. All my saws are meticulously cleaned inside and out, are gone through top to bottom, receive new Walbro carb kits,Tygon fuel and oil lines, fuel filter and spark plug. Point saws are cleaned and filed and reset to factory specs, condensers are checked using a Heathkit IT-28 checker. Recoil mechanisms, oilers and clutches are inspected, cleaned and lubricated. Fuel and oil cap duck bill valves are replaced with new Oregon brand. Some saws even receive NOS parts where needed and available. Most saws that feature original guide bars are refurbished using original designed artwork. Shipping charges which will include insurance is not included. Saws sold individually. Thank you.
1) This rare E-Z 250 (which was only made in '70 and '71) was built on October 1, 1970 and has an incredible 200 psi compression. It features 100% functionality, is 99% complete (missing only the clutch cover decal and Tension Rite instructions and has 98% original Homelite parts. Spare parts for the special Tension Rite bar system are nearly impossible to come by and therefore, two minor parts (the outer guide bar plate and cam cover) where custom handcrafted. This saw features a 19" bar and new original Homelite #38 semi-chisel chain. It also has a NOS clutch cover and cam knob tensioner assembly and air filter. The air filter cover even has the swing out built-in Tachometer, Yes, a built-in Tachometer. This may be the only model that Homelite had such a device, crazy thing swings like mad when it's running. Likewise, the Phelon point set and condenser were cleaned, tested and reset to factory specs. Despite the very nice overall condition, this saw does have some minor wear with missing, faded and chipped painted surfaces. $1000.00 OBO
More quality photos can be seen here: http://s129.photobucket.com/user/Supercharged86/slideshow/1970 Homelite E-Z 250
2) This is a very clean 1979 Homelite-Terry, made in Canada, Super Mini SL Automatic. It was built on April 6, 1979 and was the 4th unit off the line that day. It received the same treatment as stated above. It has 180 psi compression with a fully functional chain brake. It has the original bar with refurbished artwork and wears a NOS Homelite #38 semi-chisel chain. SOLD!
Quality photos can be seen here:
http://s129.photobucket.com/user/Supercharged86/slideshow/1979 Homelite Super Mini SL -0004
3) This is a very clean 1979 Homeltie DM50 demolition saw that was built on July 11, 1979. It received the same treatment as stated above and has 195 psi compression. The metal cutting blade is only an inch worn and the drive belt is in nice condition. $400.00 OBO
More quality photos can be seen here:
http://s129.photobucket.com/user/Supercharged86/slideshow/1979 Homelite DM50
4) This is a very clean 1973 Homelite Super EZ that was built on August 27, 1973. This saw wears a rare 20" Homelite Power-Tip bar with the small D3 mount. It received the same treatment as stated above and has 190 psi compression. In addition, it has a NOS air filter, new recoil rope, bucking dawg and a Oregon 72 full chisel chain that still has lots of life left. $300.00
More quality photos can be seen here:
http://s129.photobucket.com/user/Supercharged86/slideshow/1973 Homelite Super EZ
1) This rare E-Z 250 (which was only made in '70 and '71) was built on October 1, 1970 and has an incredible 200 psi compression. It features 100% functionality, is 99% complete (missing only the clutch cover decal and Tension Rite instructions and has 98% original Homelite parts. Spare parts for the special Tension Rite bar system are nearly impossible to come by and therefore, two minor parts (the outer guide bar plate and cam cover) where custom handcrafted. This saw features a 19" bar and new original Homelite #38 semi-chisel chain. It also has a NOS clutch cover and cam knob tensioner assembly and air filter. The air filter cover even has the swing out built-in Tachometer, Yes, a built-in Tachometer. This may be the only model that Homelite had such a device, crazy thing swings like mad when it's running. Likewise, the Phelon point set and condenser were cleaned, tested and reset to factory specs. Despite the very nice overall condition, this saw does have some minor wear with missing, faded and chipped painted surfaces. $1000.00 OBO
More quality photos can be seen here: http://s129.photobucket.com/user/Supercharged86/slideshow/1970 Homelite E-Z 250
2) This is a very clean 1979 Homelite-Terry, made in Canada, Super Mini SL Automatic. It was built on April 6, 1979 and was the 4th unit off the line that day. It received the same treatment as stated above. It has 180 psi compression with a fully functional chain brake. It has the original bar with refurbished artwork and wears a NOS Homelite #38 semi-chisel chain. SOLD!
Quality photos can be seen here:
http://s129.photobucket.com/user/Supercharged86/slideshow/1979 Homelite Super Mini SL -0004
3) This is a very clean 1979 Homeltie DM50 demolition saw that was built on July 11, 1979. It received the same treatment as stated above and has 195 psi compression. The metal cutting blade is only an inch worn and the drive belt is in nice condition. $400.00 OBO
More quality photos can be seen here:
http://s129.photobucket.com/user/Supercharged86/slideshow/1979 Homelite DM50
4) This is a very clean 1973 Homelite Super EZ that was built on August 27, 1973. This saw wears a rare 20" Homelite Power-Tip bar with the small D3 mount. It received the same treatment as stated above and has 190 psi compression. In addition, it has a NOS air filter, new recoil rope, bucking dawg and a Oregon 72 full chisel chain that still has lots of life left. $300.00
More quality photos can be seen here:
http://s129.photobucket.com/user/Supercharged86/slideshow/1973 Homelite Super EZ
