I always thought our old 7200V lines here were steel lines but heck I may be wrong. I know years ago when copper scrap went sky high dipsticks were trying to steal the lines along the old rail tracks.
Who makes the best Lineman pliers and Diagonal cutters?
- Thread starter Bill G
- Start date
Help Support Arborist Forum:
We had two sizes of wire with steel in it Bill - Both were 2 bronze strands twisted around steel one. They were called 631 [ same size as 4 stranded] and 477 same as 2 stranded copper. Incredibly strong, pretty sure we used small bolt cutters on them, not the Klein pliers.
Have you tried fencing pliers? The cutting notch on the side is a bypass cutter. https://channellock.com/product/85/ I always use them for cutting heavier gauge wire, like tying up corner braces.
For relatively soft wire, Klein Lineman's pliers, but I have ruined more than one set cutting something too hard. But that's on me. Also, don't use a Leatherman. Especially if the wire is still energized. Not only does it tingle a bit, but the arcing ruins the jaws...
I have ruined fencing pliers, too, but those were usually a cheap knock-off brand.
For relatively soft wire, Klein Lineman's pliers, but I have ruined more than one set cutting something too hard. But that's on me. Also, don't use a Leatherman. Especially if the wire is still energized. Not only does it tingle a bit, but the arcing ruins the jaws...
I have ruined fencing pliers, too, but those were usually a cheap knock-off brand.
I am very familiar when fencing pliers
spent my entire life using them. They are a multi purpose tool that does many tasks half ass but none excellently. Well possibly staple removal
That machine specs only softer materials. No steel.
Aw No
There is no chain link fence here. I work with real fence and tear out old fence.
What kind of fence is tougher to cut than 9 gauge chain-link?
Well if you missed it earlier I clearly said........
Aw No
There is no chain link fence here. I work with real fence and tear out old fence.
WOW
I figured as much.I am very familiar when fencing pliers
Very true, I think they may be as good as anything for cutting heavier gauge wire.
They do it but slowly
IntegrityCarpentry
ArboristSite Operative
Mini bolt cutters is what I would get. I have lineman and several diagonal cutters. Mostly my diagonals are in my tool belt and cut nails if it’s just a couple and don’t want to get sawzall for it, or pulling finish nails out of trim through the backside. If you are set on diagonals or lineman’s, an overmolded handle will give you a bit more cutting force or make it feel easier.
Well if you missed it earlier I clearly said........
WOW
So what kind of fencing material are you working on?
Depends on the day
Red Brand or Keystone but mostly Red Brand
32 inch with 4 barbs
39 inch with 3 barbs
47 inch with a single barb
5 barbs straight
Some is light with 11g
Most is heavy with 9/11g
Barb runs 12.5g of course double twist
Of course 9g brace
I don't think I've ever seen a Field wire fence done in 9 gauge, but Red Brand lists it. That's probably some pretty good fence fabric.
Reading the specs on that wire, I see that the top and bottom wires come in at 6 gauge. That is some heavy-duty fence. I presume that is the reason for your interest in the best wire cutter?
I install fences, but never in field wire. The toughest wire I encounter is the 6+ gauge bottom tension wire, and it takes a serious effort to cut. (It comes in at .1740 diameter, which is a bit thinner than 5 gauge) I resolved that the fastest and easiest wire cutter for that stuff was my angle grinder with a thin metal cutting blade. Battery-operated, it whistles through that wire faster and easier than a pair of two-handed bolt cutters. That leaves me one hand for the grinder and one to hold the wire.
Fencing pliers or the lineman's pliers for the 9 gauge wire.
Reading the specs on that wire, I see that the top and bottom wires come in at 6 gauge. That is some heavy-duty fence. I presume that is the reason for your interest in the best wire cutter?
I install fences, but never in field wire. The toughest wire I encounter is the 6+ gauge bottom tension wire, and it takes a serious effort to cut. (It comes in at .1740 diameter, which is a bit thinner than 5 gauge) I resolved that the fastest and easiest wire cutter for that stuff was my angle grinder with a thin metal cutting blade. Battery-operated, it whistles through that wire faster and easier than a pair of two-handed bolt cutters. That leaves me one hand for the grinder and one to hold the wire.
Fencing pliers or the lineman's pliers for the 9 gauge wire.
I am sure you are well skilled in farm fencing
Nope. Only a tiny bit. That's why I was asking you what kind of materials. I'll bet chain link is a lot harder work, though, and the customers far more demanding.
I may have ripped out more old fences than you would imagine, though. I know a lot about tearing 'em up.
Especially when they are impregnated into a zillion little trees.
Not many trees in a fenceline can stand up to the SHoule. Mine is a previous model, and only cuts 15" diameter.
https://www.shoule.com/tree-shear-ts16-treerex.php
I may have ripped out more old fences than you would imagine, though. I know a lot about tearing 'em up.
Especially when they are impregnated into a zillion little trees.
Not many trees in a fenceline can stand up to the SHoule. Mine is a previous model, and only cuts 15" diameter.
https://www.shoule.com/tree-shear-ts16-treerex.php
Not sure what a company's promotional video of a tree shear has to do with selecting the best lineman pliers or dykes but hey you do you.
Now back on topic..................I hope
I bought a pair of Klein J213-9NE lineman pliers and plan to get a pair of Klein D2000-49 diagonals Thursday. I will see how they work out. I might go ahead and pick up some Knipex ones next week and compare.
I bought a pair of Klein J213-9NE lineman pliers and plan to get a pair of Klein D2000-49 diagonals Thursday. I will see how they work out. I might go ahead and pick up some Knipex ones next week and compare.
LuDookie
ArboristSite Guru
I liked the old maroon handled ones. Talk about a fluke, and how a good quality company can have the occasional banana… I broke the handle clean off a pair once. It was weird. I had cut with them so much that the inside “fish tape pulling area” was starting to touch, so when I tried to bend them back, it broke. As a joke, I glued them together and put them in my bag and would lend them out. On first use they would break again and whoever borrowed them would be a bit thrown. That might have been my last pair before they came out with the new fancy molded, multi colored handles. I’ve gone through at least 5 pairs since then, but have one pair of Knipex that I’ve kept and have been the best, although the cutting blades are chipped out a bit.
Are you watching Channellock 349 on ebay like I suggested?Now back on topic..................I hope
I bought a pair of Klein J213-9NE lineman pliers and plan to get a pair of Klein D2000-49 diagonals Thursday. I will see how they work out. I might go ahead and pick up some Knipex ones next week and compare.
And to answer some of pdqdl! question. High tensile with springy things and the not very much metal barbed wire are quite hard. The more massive barbed wire is pretty soft compared to what would replace it. Exactly what chore the search for the best involves remains elusive.
Not being able to pinch skin is one criteria I would put in the search parameters.
At least you only need to carry one tool to put up electric or barbed wire fence.I am very familiar when fencing pliers
