luke...
New Member
Ive got a MS261 (2021) thats started to not idle, starts ok from cold, run it through some cuts and put it down and itll cut out after 10 seconds or so
It was due a service so has had fuel filter, air filter and spark plug
Some googling seemed to point similar issues at the fuel solenoid, so ive just replaced that but still got the same issues
I tried an M-Tronic reset thinking that was needed after the new solenoid, following the process for m-tronic 3.0 but it wont idle on cold start for longer than 13 seconds, guide says to leave it running between 30-60 seconds but everytime, itll idle, get to 10 seconds the idle will raise the it'll cut out each time
Anyone had anything similiar?
Cheers in advance
It was due a service so has had fuel filter, air filter and spark plug
Some googling seemed to point similar issues at the fuel solenoid, so ive just replaced that but still got the same issues
I tried an M-Tronic reset thinking that was needed after the new solenoid, following the process for m-tronic 3.0 but it wont idle on cold start for longer than 13 seconds, guide says to leave it running between 30-60 seconds but everytime, itll idle, get to 10 seconds the idle will raise the it'll cut out each time
Anyone had anything similiar?
Cheers in advance