"You Suck" Thread 2019--Pics required!

[dynodave]

Well Happy new year!
2018 was a good run but now time for a new you suck-2019-
Now 6 years for me with AS. Not the most prolific poster here but still enjoy the "sport".
Started with 1 poulan in 1980. In the 90's I picked up 3 homelite: XL2, 707d & 7-19C
Now have 61 saws total , most all except a few have been made to run. Mostly recovered from E-10 poisoning.
see list and pix @ below links

 

[John Lyngdal]

Here's my first 2019 suckage contribution. A one owner 034 with original manual, purchase receipt, 2 extra freshly sharpened chains, clean piston skirt, 150 psi of compression.
$150. The year is starting off nicely.

 

[John Lyngdal]

My second suckage find for 2019 is the MS440 full wrap that I picked up for $260 at a local pawn shop. Certainly well used, but has a clean piston skirt, OEM cylinder, 155 psi of compression, and a like new 25" bar and chain. The cylinder cover was trashed, so I replaced it with a AM unit I had on hand. Still needs some outside dawgs and chain catcher before its next trip to the wood pile, but before then it needs a good bath.

 

[NvrDwn]

You suck..

 

[Hallrdave]

Took a gamble and sold my 372xpw which needed work (new cylinder) for 210 and bought these 3 for 300. Looks like they've been rode hard and put down wet. I won't know anything till I get into them but the 395xp runs. I dont know about the 201s. Pretty dirty hopefully they'll clean up nice.

 

[PA Dan]

Worked on this deal for a couple weeks! It's a couple saws short but they may come next week!

MS461
MS193t
CS-400
2166

 

[Sepia]

Worked on this deal for a couple weeks! It's a couple saws short but they may come next week!

MS461
MS193t
CS-400
2166

Hoarder!!

 

[PA Dan]

Hoarder!!

Thank you![emoji6]

 

[Andrew Finley]

Sachs/Dolmar 114 DOA Bad ignition module. Broken starter pawl replaced Running well now.
McCulloch Mini Mac 110 DOA Carb Kit installed. Runs. Needs a chain and it leaks bar oil...

 

[Colt Marlington]

I could never suck as bad as you guys.
But it was a pretty exciting day for me.

I got a couple of new chains and a bar for my Shinny 491 at the outlet store. A new 20" power care bar for $7. Not shown in the picture, but it's a 4-rivet pro-lite style.
And a new Oregon H78 chisel chain to match for $5.
And for the existing 18" bar, a new Oregon Speedcut narrow kerf 95txl072g chain for another $5.

Then....after that.....the completion of my 25-35-50-70 cc four saw plan.
The final piece to the puzzle.
(cylinder wall)

The crux ge gras
(piston)

The creme de la creme
(by some standards)

A dirty old 40th week of 2008 model Hooskavarna 372XP that started right up after sitting on the shelf for who knows how long, out the door for an even fifteen Jacksons.
And so far no detectable leaks. A little burn on the bar tip, but unsharpened chain in nice condition.
I did break the muffler gasket though

 

[PA Dan]

I could never suck as bad as you guys.
But it was a pretty exciting day for me.

I got a couple of new chains and a bar for my Shinny 491 at the outlet store. A new 20" power care bar for $7. Not shown in the picture, but it's a 4-rivet pro-lite style.
And a new Oregon H78 chisel chain to match for $5.
And for the existing 18" bar, a new Oregon Speedcut narrow kerf 95txl072g chain for another $5.
View attachment 697447
Then....after that.....the completion of my 25-35-50-70 cc four saw plan.
The final piece to the puzzle.
(cylinder wall)
View attachment 697449
The crux ge gras
(piston)
View attachment 697450
The creme de la creme
(by some standards)
View attachment 697452
A dirty old 40th week of 2008 model Hooskavarna 372XP that started right up after sitting on the shelf for who knows how long, out the door for an even fifteen Jacksons.
And so far no detectable leaks.
I did break the muffler gasket though

Sounds like somebody had a good day! Oh and you suck!

 

[Colt Marlington]

Sounds like somebody had a good day! Oh and you suck!

Thanks! Certainly not as nice as your score though.

You really really suck!

I really don't know what these old saws are worth. But I don't have to do a thing to it. It was all there and running.
And it seems like a pretty light saw for it's size(not counting the heavy-ish bar). Gotta see if I can make the new 20" power-match bar off the 660EVL fit it.

 

[Colt Marlington]

Got this Snap-On compression tester for 65 out the door.

Think I'll need a different adaptor for a chainsaw plug hole, or I might make a sleeve to shorten the threads.

 

[ChainLightning]

Homelite 750 for $175

 

[Colt Marlington]

View attachment 699377 Homelite 750 for $175

I need to find something like that to mill a couple of big logs into slabs.

You suck!

 

[cuinrearview]

Nice scores fellas! I need to get to pounding pavement. I almost popped on a $150 357xp the other day, but it was too far gone.

 

[RedneckChainsawRepair]

Traded this unlimited coil 3120 off back in late 2010 when I got out of racing. Bought it back this week. About 5 tanks on new oem top.

Like seeing a old friend again and boy she was loud starting it up in the metal pole barn.

 

[bomar]

Scored this big mount stihl roller nose 5ft bar for $60. Rails and metal are in very good shape. Lots of life left on it I just need a chain for her now.

 

[bang]

I located these about 2 weeks ago but wasn't excited because they were about 35 miles away. I happened to be going close by Friday and the guy met me and I got both of them for $50. I know they're clamshells and I bought without much inspection but they were covered in grit like they'vebeen sitting in a shop for awhile. The 039 has a nice bar and like new Stihl chain but the filter cover was off and the filter missing. I dumped the gas and added new gas and to my surprise it started right up but didnt run well. I adjusted the carb to factory settings and it screams. I have a filter ordered and I'll try it in wood when it arrives.
The 180 didn't have gas so I put new gas and it fired but wouldn't accelerate properly so I cleaned the carb and installed a kit and it runs good. I sharpened the chain and I'm going to try it out later today.
I'm hoping for an easy flip or trade bait.

 

[Hulsty]

Scored a NIB EA4300 for $250, they retail at $800 down here. Scored a good deal on a bar, they first up they sent the wrong one, correct one shouldn't be far away. And received in the mail my 7901 top end