Search results

What ever, I have no suck luck... unless I wanted a couple thousand wildthings Great find

Good Morning, I just realized that I do not have a parts manual for an MS460 I am tinkering with Thank you Greatly in advance

I bought one at an auction for $100 the M101 variant and everyone laughed at me, ( I was fairly young) . I bought it for my father that still likes to go out in the woods and gathers firewood with his tractor. it even has the tall 2-1/3 ton military tires going over stumps and ruts, logs ect...

I have a lot of them. the most current one I had was looking for a driver to deliver parts. the only two hiring credentials I had was show up for the interview on time and have a valid drivers license.. OHH ya and the pee in the cup. heck I was starting them out at $14 hr being a seasonal...

keep with the meteor 064 piston it has wider skirts that the OEM 064. they really make a great runner. haven't tried on the 440 bottom but the one I build is my go to when I put the throw down on the wood pile.

Good morning, Personally I would start at looking at the gaskets/ diaphragm and their orientation to make sure they are not installed upside down. Also double check the meter lever that moves the needle to be sure it is level with the body of the carb. you may also be observing your carb was...

Good morning ask about his maintenance and if the anode rod has been changed. And if the circulator pump and blower are original. Also if the door seal has been changed. Just trying to find a fair price to YOU. This can be a challenge at least you can justify a little more if all of the...

acme tools does an okay job you just have to be observant as most are parts swappers. if the carb is bad they would just replace the whole carb and not replace or clean the carb. Best bet is have him come on to the site or at least try to learn the ins and outs so that when time comes for him...

You guys got this all wrong. He noticed he needed to mix fuel googled What ratio then decided way too may options and left for some and a mix cup with 52.33to 1 with the highest octane you can get at that back road gas station. Brand of oil for chapter 2 Sent from my iPhone using Tapatalk

I only touch mine twice a day before i go to work 4:45 and just before i go to bed 10:00. I throw in 4-5 splits every time . If its really cold below zero i'll check it right when i get home and throw in a split or two but i do add a little more when its below zero

take a look at the S/N there was a recall on that model I have one exactly like yours but the not with in the recall. if you search on here 500vl recall it will pop up

I use the smelliest soap as mentioned and have had success. I also sprinkled hair around and that has worked as well. Danm dogs ate the soap

Saw your CL ad and thought about you . Will keep an eye out up in Our neck of the woods. I got the an auger and a very deep lake

Dont give in just yet, my heatmore is 10 years old and the high aquastat has stuck on me only when i first start it for the season for the last few. There is (on mine anyway) another dial under the cover this dial is the temp range mine will climb to 190 and shut off. Take another look the...

Pick up a homelite zip and giver my ears and hands still vib. After shutting down and the wife and kiddos yelling to turn if off. Sent from my iPhone using Tapatalk

Northern Wisconsin just South of Superior. I am suprised by that as well every morning on the way to work at 5:am nothing but log trucks going into town. Sent from my iPhone using Tapatalk

could also be the type of wood being added? There are a lot of places to start. First is the circulator pump pumping? is the bladder (inner tube) above the indicator flag if you cannot feel water you need to add. Keep looking there is a solution if you keep at it good luck

I had pulled the cover off of the muffler its clean, I suspect there could be a leak as its way rich to idle/ and on the high. I was looking to see if there were know issues with the zama carb that a standard carb rebuild wouldn't fix ..

looking for further guidance on 034 thats throwing me fits. what it's doing is shutting down coming out of a cut it wont idle really well but the shutting down is the concern. i am about to press test the crank case but if there is something in the carb that i overlooked please let me know...

we have filled our skid loader tires as well as an all terrain forklift rear steer tires and never regretted it. on the tires you can get them recapped that would have to be verified on you application but it works great i have seen A LOT of nails in those tires over the years and was thankful...