Search results

Now your cuttin... You have just proved to me that on the bigger saws more chain speed is a plus! Who makes a 10 Tooth!:msp_wink:

660 resurection... I put the crank case together today and installed the new Baileys BB piston and cylinder, along with the aftermarket crank. I checked my squish and with the Kits base gasket installed I have .029" of squish. The jug has only had the transfer ports pointed towards the...

Baileys Came Through! Gregg, Thank you for your support with my 660 BB. All the parts are here including the new cases with bearings. I am building it up today!

And I weigh more in a tree too...:biggrin:

Now its happening to me!!! Ok. This is how my life goes. I had a large petrified maple to block down today and chose to climb with an MS250 with low miles. This is one of my saws. I was curious about the compression and just grabbed it. It always cranks on the first pull, but, OMG that thing...

So what problems is the atv having?

Orange bottle Dino' oil.

Your right!:hmm3grin2orange: 6 beer's no supper and a keyboard! My bad...

Mark, Forgive me for fanning the flames but after looking back over the posts here I guess I missed the saw failure discription. Could you review the carb problem for me? Seafoam can be used in many different ways and in conjuction with spraying through the H/L needle ports can solve some...

Thank you for the responses. I agree the saw runs great, but when your helping old men with ideas of their own its hard to say I wish I had 190 pounds of compression. The oil tank statement is interesting. I can see where that might up compression if it made it up onto the rings. The muffler...

MMO...MMO...MMO...Oh Yea! Marvels Mystery Oil! Keeps rings loose and valves slick! :hmm3grin2orange: It took me a while...

It was the Seafoam... It cleans great!

No farce, the saw my blow tomorrow, but it cuts like crazy now. I have no clue...

What to do with old fuel. If I understand your question it looks like your looking for an addative to help the fuel store longer. I have used gallons of seafoam and it is a great cleanser for the fuel system, it can help with ice and water also. We here in NC have little access to fuel...

Has anyone ever seen a stock MS250 or any stock stihl with 190psi of compression? The saw is about 2 years old, light use. The piston and rings are very shiney. No carbon on top or on roof of cylinder. The exhaust is black but no build up. The exhaust side of the piston is a warm gold. Stihl...

I bow my head in shame before your greatness. Your all seeing and all knowing mind is beyound my feable grasp. Within your presence the rays of illumination go forth before you. I shall retire now from this life. And live no more...

Thanks for support....

031 New approach... I had a well used 031 today with decent annular bushings and chose a new approach to the service. The saw would not rev, and sputtered, and when carb was adjusted the results were always different. I did my 1 hour overhaul with points adjuatment and confirmed the...

I found the failure and it is fixed. :blob2: I found the cause. The film sheet on the metering side if the carb was sucked in and had a tiny crease in it. The cause was wood fibers packed into the passages that I can only assume were sucked in through the crease. Nothing was in the screan...

Update on the new build. Well I received the new BB kit quite sometime ago. Bailey's was prompt and on the ball. Now I am waiting on the cases, oddly no word on the backorder. More to come...