Want to Buy Mikita DPC 9500 concrete saw coil

[Bob95065]

I am looking for a coil for a Makita DPC 9500 concrete saw. Please PM me if you have a working one for sale.

 

[mgr]

Coil will be a SEM and rpm limited. Same coil as a Sachs Dolmar 343 concrete saw.

 

[Bob95065]

Is there one that is better I can use?

 

[mgr]

They are rev limited because the blades can't survive high rpms. Pull the flywheel and post a pic of the coil.

Manuel

 

[Bob95065]

Pictures below

http://www.arboristsite.com/communi...2/?temp_hash=a98db73d38b1ff013cfd0b59c40c29e0

http://www.arboristsite.com/communi...3/?temp_hash=a98db73d38b1ff013cfd0b59c40c29e0

http://www.arboristsite.com/communi...4/?temp_hash=a98db73d38b1ff013cfd0b59c40c29e0

http://www.arboristsite.com/communi...5/?temp_hash=a98db73d38b1ff013cfd0b59c40c29e0

 

[mgr]

Did you test it with the kill switch wire removed, also check the ht lead.

This coil is not limited like i mentioned. Carb has a governor.

Dolmar 119/120 wacker bts11/13 Husqvarna 480/2100 uses this coil.

 

[Bob95065]

I checked the coil this weekend. I disconnected the kill switch and still had no spark. I used a multimeter to check the coil. I compared the values I got with a working coil from a chainsaw. The spark plug wire to ground has a short.

Can you please see if you have a replacement working coil? I am interested in finding a working coil.

Bob

 

[mgr]

http://www.ebay.com/itm/Husqvarna-2...180821?hash=item4898802755:g:S~wAAOSwo4pYNd7C