ArboristSite.com Sponsors
 
 


ms200t throttle linkage!!!!!!

Discussion in 'Chainsaw' started by jmemmert, Nov 16, 2009.

  1. jmemmert

    jmemmert ArboristSite Member

    Joined:
    Jul 29, 2008
    Messages:
    86
    Likes Received:
    0
    Location:
    Darlington, IN
    Wow, what a puzzle. I took it apart to fix the kill switch, and now can't get the thing back together!!!. Does anybody have a pic of how it is supposed to go?
     
  2. rmh3481

    rmh3481 Addicted to ArboristSite

    Joined:
    Jan 23, 2008
    Messages:
    1,797
    Likes Received:
    353
    Location:
    Pennsylvania, The Keystone State
    Maybe this will help?
     
  3. jmemmert

    jmemmert ArboristSite Member

    Joined:
    Jul 29, 2008
    Messages:
    86
    Likes Received:
    0
    Location:
    Darlington, IN
    OK, great. thanks... I am having difficulty figuring out the u-shaped linkage, part 15 in the pic
     
  4. MS260 Fan

    MS260 Fan AboristSite Guru

    Joined:
    Jan 22, 2009
    Messages:
    537
    Likes Received:
    239
    Location:
    Ontario
    Just assuming you ran into the same problem as me. The u-shaped pc just pulls out of 2-holes in the left half of the handle. I pulled it out to get all the linkages underneath. The throttle and choke linkages run behind it. It's a retainer.

    I took the handle off my 020t twice. Cursed myself for doing it both times. The key was taking the on/off/choke switch (item 18) off the right side of the handle. Take out the screw and pull the plastic selector switch out. Way easier to get everything to line back up.
     
  5. pwtree

    pwtree New Member

    Joined:
    Apr 15, 2012
    Messages:
    1
    Likes Received:
    0
    Location:
    leicester
    Same. thanks for the pic
     

Share This Page