Husky's 346NE Crowned the new KING.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bookerdog

The New Champ
Joined
Apr 12, 2005
Messages
2,489
Reaction score
356
Location
washington
Here is video of a 346NE with 24inch bar modded by TsT.
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/UdMhlj4xF5w"></param><embed src="http://www.youtube.com/v/UdMhlj4xF5w" type="application/x-shockwave-flash" width="425" height="350"></embed></object>
 
I can't see this 346 vid at work but if it runs like this 026, then it's hot!:clap:

http://www.nwchainsaw.com/026hotsawclass.wmv


LMAO!

so now we are taking race saws into the woods?



ya, the 346 is the king but 2K knew that for weeks now, didnt you.


:buttkick:


<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/_6KUyxCfxY0&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/_6KUyxCfxY0&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>



BD, that 346 is hot fro' sur' but i think my saw may have a bit more torque.




:cheers:
 
LMAO!

so now we are taking race saws into the woods?



ya, the 346 is the king but 2K knew that for weeks now, didnt you.


:buttkick:


<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/_6KUyxCfxY0&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/_6KUyxCfxY0&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>



BD, that 346 is hot fro' sur' but i think my saw may have a bit more torque.




:cheers:

Reread my post Ray Charles, I said I could not watch the video and didn't know what kind of 346 this was.....:buttkick:
 
Am I missing part of the video?

I went to a place where someone quoted the original to see the video. Am I seeing it all? Was the video just of someone cutting a log in a shop?
 
That's impressive!!

It pulls it about as well as a stock 70cc saw!

It will pull with my 372 muff modded saw in that size wood. Any larger and I would think the 372 will take over. Im going to try and get video up of it against a stock 681 in 24inch wood. What Im trying to do is get a light weight saw with enough reach on it for a ground saw for logging. Will be logging some property this fall and should have 3 of these ready for ground saws.
 
It will pull with my 372 muff modded saw in that size wood. Any larger and I would think the 372 will take over. Im going to try and get video up of it against a stock 681 in 24inch wood. What Im trying to do is get a light weight saw with enough reach on it for a ground saw for logging. Will be logging some property this fall and should have 3 of these ready for ground saws.

I think it'll do the job.:givebeer:

How extensive is the porting? I assume it's got a bunch of compression? What kind of free load rpm does it turn and in the cut?
 

Latest posts

Back
Top