Careful with you loads...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

litefoot

Addicted to ArboristSite
Joined
Jul 12, 2004
Messages
2,402
Reaction score
527
Location
American West
This guy in TN was slinging a cable around his load and aimed a little too high and caught the power line. Lucky he wasn't killed.
 
Last edited:
:confused:


Looking at the second picture i started wondering if the truck itself would have some damage to its electronics....

then came the third picture..........
 
A little fluff & buff and she's back on the road again....:dizzy: :laugh:
 
Too bad! Thanks for posting, though.

Now, which chainsaw to buck those logs?

Would it need a sprinkler system set on with the automatic oiler?
 
Pretty serious Post Toasties there.

Here's one for the engineers..... Here at the county JDC, they were repairing the driveway, cutting out the old section of conrete with a big 36" saw, with a serious water attachment. Apparently the contractor asked the county guy if there were any wires running under the driveway. A look at the prints, no wires. Imagine the machine operator's chagrin at feeling a "tingle" as he sawed through the street light conduit.......bzzzzzzzzzAP! He is OK, but boy, was he pithed!

Also, there have been many repairs inside this building that require sawing out sum concrete, and thogh the prints show nothing, they invariably have to replace drain line, power cable, computer network, phone, or other cable. It is such a pathetic example of professionals "dealing with a slack hand."
 
Eh, no big deal. That :censored: 'll buff out.

In all serious tho, I'm glad the dude wasnt hurt. I'm sure he knows how dang lucky he was.
 
This guy in TN was slinging a cable around his load and aimed a little too high and caught the power line. Lucky he wasn't killed.

Awesome post, thanks for sharing.
A few years ago here in NC a guy raised the bed of his dump truck into the power lines and didn't know it. He got out of the truck OK but as he walked beside it he touched the bed and it killed him instantly.
 
Pretty serious Post Toasties there.

Here's one for the engineers..... Here at the county JDC, they were repairing the driveway, cutting out the old section of conrete with a big 36" saw, with a serious water attachment. Apparently the contractor asked the county guy if there were any wires running under the driveway. A look at the prints, no wires. Imagine the machine operator's chagrin at feeling a "tingle" as he sawed through the street light conduit.......bzzzzzzzzzAP! He is OK, but boy, was he pithed!

Also, there have been many repairs inside this building that require sawing out sum concrete, and thogh the prints show nothing, they invariably have to replace drain line, power cable, computer network, phone, or other cable. It is such a pathetic example of professionals "dealing with a slack hand."

I used to work new home construction as a carpenter, still do from time to time. A lot of plumbers and Electricians and HVAC Guys move stuff because they have to, because an idiot architect or engineer wasn't paying attention and ran conduit through duct work, or drain pipe, or whatever. Our guys told the engineer, who should have changed the plans, but I'll bet you $50 he never did. So the next time somebody goes to cut something under a driveway of the house we built, the plans won't be right. i remember one where the site engineer never drew in the old leech field (we tore down the old house and built new on the old foundation). Sure enough when the trencher came in it tore up the leech lines, that lot wreaked like a$$ for the next 3 weeks. Ended up costing the trenching company a lawsuit, but how were they supposed to know?
 
Wow. I though I was the only guy with that kind of luck. That guy is lucky he didn't end up looking like a hot dog that was in the microwave too long.
 

Latest posts

Back
Top