Swap meet...

[PB]

I need a T27 wrench. The only one I have won't even reach into the muffler for the bolts on the Stihls. I don't work on them that much, so I don't want to buy a whole set of long reach T-handles unless I have too. If someone has an extra one kicking around, let me know what you need.

 

[Bill G]

Anybody have a good 750 cylinder they'd let go of? Scored would even work, as long as it can be cleaned up. I have a good piston and rings.

I thought the one I sent you was good. I hope this is for a 2nd saw

 

[Bill G]

I need a T27 wrench. The only one I have won't even reach into the muffler for the bolts on the Stihls. I don't work on them that much, so I don't want to buy a whole set of long reach T-handles unless I have too. If someone has an extra one kicking around, let me know what you need.

How about the L version.

Bill

 

[serial killer]

PlantBiologist,
I have bought a couple cheap screwdriver handle ones at auto parts stores. I have one from AutoZone and one from Advance Auto Parts. Each was about $4. They are skinnier than a regular T-wrench shaft, and I've never yet found anything that they won't fit.

 

[PB]

How about the L version.

Bill

PlantBiologist,
I have bought a couple cheap screwdriver handle ones at auto parts stores. I have one from AutoZone and one from Advance Auto Parts. Each was about $4. They are skinnier than a regular T-wrench shaft, and I've never yet found anything that they won't fit.

:bang: Nevermind guys, but I guess I do have the screwdriver ones. They are back home in PA. I will have my dad send them up to me. Thanks for jogging my memory.

I was trying to take the muffler off the 361 today to take a pick and the ones I have fold out like a pocket knife, and couldn't make it.

 

[Saw Dr.]

I thought the one I sent you was good. I hope this is for a 2nd saw

I just found that saw the other day.... Trying to take the easy way out on the spark plug thread repair. I have seen a bunch of people wanting 750 pistons, so I figured there might be some cylinders out there. I can always fix that cylinder if I have to. I have never been a fan of inserts, even the good ones.

 

[davecharles]

I,ve got a Husky 23 that needs a piston and a rewind spring. Since this is a poulan/husky, If someone has a Poulan 2300 that they don't want (or want to sell cheap) let me know. Or if someone needs a Husky 23 for parts let me know. This one has the chrome lined bore (cyl is usable) and chain brake that the Poulan 2300 doesn't have if you want to update your good running 2300.
Dave

 

[Bowtie]

I have a new set of OEM rings for a Stihl 051-075-076 series saw. Part #1111 034 3006. Interested any basically any trade or whatever.

 

[forestryworks]

Looking to trade a brand new Dolmar 7900 with a full wrap for a brand new or nearly brand new 372xpw (75cc)

you really like them 372's don't ya?

 

[Tree Sling'r]

you really like them 372's don't ya?

Yeah, that and I don't have a use for a 7900.

 

[Bill G]

I just found that saw the other day.... Trying to take the easy way out on the spark plug thread repair. I have seen a bunch of people wanting 750 pistons, so I figured there might be some cylinders out there. I can always fix that cylinder if I have to. I have never been a fan of inserts, even the good ones.

I just might dig out another.

Bill

 

[fredmc]

Homelite XL-101/102/103/104

I'm looking for piston rings and cylinder for a homie xl-101. will buy or trade

 

[gregz]

I have a 066 red light flat top cover . metal 066 ID tag is above average. cover has crack as shown. 066 660 starter cover , fresh paint ,decent. has elastro rope and new stihl pop in emblem..nice stuff

the starter cover will need a set of pawls..what ya got for trade

 

[blackoak]

I have a 066 red light flat top cover . metal 066 ID tag is above average. cover has crack as shown. 066 660 starter cover , fresh paint ,decent. has elastro rope and new stihl pop in emblem..nice stuff

the starter cover will need a set of pawls..what ya got for trade

I'm interested in these parts. PM sent. How far is Lowell from Evansville

 

[super3]

044

Looking for a few parts for an 044
starter cover,filter cover(HD Filter),oil pump,handle bar and a rear handle molding.

 

[bullseye13]

088/880 parts

Looking for parts for a 088/880. Particularly a crankcase, and a few other things. if you have anything let me know. (I dont have a lot to trade but i do have $) I have a whole crate of 051/075/076/ts random parts if anyone is looking for something.

 

[hanniedog]

Looking for a 242xp or 246 or 346xp, have an 084 power head to offer. The saw does run but may have cyl issues.

 

[HittinSteel]

I've got 2 16" 3/8" PICCO chains that I have no use for. One chain is new in the box and the other has been sharpened 1 or 2 times.

 

[2000ssm6]

I've got 2 16" 3/8" PICCO chains that I have no use for. One chain is new in the box and the other has been sharpened 1 or 2 times.

how many drive links and what brand?

 

[HittinSteel]

how many drive links and what brand?

They are Stihl (green)..... they are from my MS 210. Not sure on the drive links off hand, but I can look on the box when I get home.