Swap meet...

[Mastermind]

Building, as in porting???? That sounds interesting!!! They don't get much attention here, but they should. They are a very competent saw, stock.

Yes I've milled it for a pop-up and gave it a woods port. The intake needed more attention than anything.

 

[vw_motorsports]

I'm searching for a choke assembly for a Stihl 020T. Also needing a good used piston for a Stihl 046. I have parts and $$ to trade.

I have a new aftermarket one for a 046, send me a PM

dave

 

[vw_motorsports]

Jonsered 490 piston and cylinder

Need a piston and cylinder, or at least the piston for a J'red 490, 44mm ....have $ and some stihl 031 parts. Please PM

thanks

 

[lwn9186]

019t

I need the engine housing, clutch cover and air filter cover for an 019t. Green paper for trade.

Edit..........................Its an 019t

My bad it's an 019T.....

 

[ChainsawmanXX]

I know its not a saw but, does anyone have a good working laptop they'd be looking to trade a saw for?
Thanks!

 

[hoss]

I'm lookin for a Jonsered Model XF (any shape as long as it is fixable) and a full wrap handle for a J-Red model 90. I have tons of stuff from all makes to trade or cash.

 

[tomdcoker]

045 Stihl bar

I am looking for a bar for a 048 Stihl. I want a 24" bar, hardnose or sprocket, 3/8 or .404 pitch. I would consider a 28". It does not have to be a Stihl, just the correct mount for the 048. It does not have to be pretty. just one that is straight and the rails will clean-up. I also need an airfilter for the same. Used if in good condition or new. I prefer the screen type. I also need the plastic guard that is inside the clutch cover. Part # 1117-656-1500. I have some parts or paypal. PM me if you have something. Thanks Tom [
FONT=Arial Black]II am not having a good day apparently. It is a 048 saw.[/FONT]

 

[blsnelling]

I am looking for a bar for a 048 Stihl. I want a 24" bar, hardnose or sprocket, 3/8 or .404 pitch. I would consider a 28". It does not have to be a Stihl, just the correct mount for the 048. It does not have to be pretty. just one that is straight and the rails will clean-up. I also need an airfilter for the same. Used if in good condition or new. I prefer the screen type. I also need the plastic guard that is inside the clutch cover. Part # 1117-656-1500. I have some parts or paypal. PM me if you have something. Thanks Tom

Any 3003 mount bar wioll work for you. They fit most saws from 026 up to 066. There are a few exceptions.

 

[tomdcoker]

Any 3003 mount bar wioll work for you. They fit most saws from 026 up to 066. There are a few exceptions.

Thanks for the reply and information. Tom

 

[fredmc]

I am looking for a bar for a 048 Stihl. I want a 24" bar, hardnose or sprocket, 3/8 or .404 pitch. I would consider a 28". It does not have to be a Stihl, just the correct mount for the 048. It does not have to be pretty. just one that is straight and the rails will clean-up. I also need an airfilter for the same. Used if in good condition or new. I prefer the screen type. I also need the plastic guard that is inside the clutch cover. Part # 1117-656-1500. I have some parts or paypal. PM me if you have something. Thanks Tom

I have a 24" bar that will fit.

 

[ELECT6845]

Stihl 056 muffler

Anyone have a 056 muffler they would like to part with? I have 026 parts or greenbacks

 

[SawGarage]

Anyone have a 056 muffler they would like to part with? I have 026 parts or greenbacks

I have a NOS muffler, if that interests you? :dunno:

 

[7hpjim]

I am looking for a bar for a 048 Stihl. I want a 24" bar, hardnose or sprocket, 3/8 or .404 pitch. I would consider a 28". It does not have to be a Stihl, just the correct mount for the 048. It does not have to be pretty. just one that is straight and the rails will clean-up. I also need an airfilter for the same. Used if in good condition or new. I prefer the screen type. I also need the plastic guard that is inside the clutch cover. Part # 1117-656-1500. I have some parts or paypal. PM me if you have something. Thanks Tom

Title says 045 but post says 048, which are you wanting parts for?

 

[Tree Pig]

chain brake handle

I rolling on my rebuild of my 660 and just realized I need a chain brake handle stihl #1120-790-9101 I believe... If anyone has one it would be greatly appreciated... I have a 066 crank or 660 muffler to offer in trade but thats about it... other then cash. If anyone knows what other saws this fits I would be glad to know fleebay only has one listed for 660 and I could get a new one for what the seller is asking.

 

[SawGarage]

....If anyone knows what other saws this fits I would be glad to know fleebay only has one listed for 660 and I could get a new one for what the seller is asking.

Just the 066-660's... due to the width, the 066-660 will fit on the 064-650's, but NOT the other way around....

I've been looking for a while too

J

 

[Mastermind]

Just the 066-660's... due to the width, the 066-660 will fit on the 064-650's, but NOT the other way around....

I've been looking for a while too

J

Hey man. You still need that 044 tank??? If not I'll have to find a saw to put it on.

 

[Tree Pig]

Just the 066-660's... due to the width, the 066-660 will fit on the 064-650's, but NOT the other way around....

I've been looking for a while too

J

crap thats not good news

 

[midnite]

p&c for stihl 028

i need a piston and cylinder for my 028wb stihl. prefer to get the 46mm super set but will go with the 44mm as thats whats on there now.

 

[tomdcoker]

Title says 045 but post says 048, which are you wanting parts for?

Sorry about the screw-up. It is a 048. Tom

 

[tomdcoker]

I have a 24" bar that will fit.

Send me a PM and let me know the specs. and what you want for it shipped to zip 38828. Thanks Tom