562xp / 28" techlite bar / Fresh Youtube video

[mikefunaro]

@ TKPOWER: you best be posting some photos..

 

[HittinSteel]

I would estimate the 555 being a few bones less than the 365, and the 562 will be around the 357 ballpark. Just guesstimating as that's where they fall in the lineup.

Looks like $650-$700 according to the original Husqvarna press release

 

[TK]

When will they be in the pipeline for sale?????? Firewood season is about to kick off for me! And I could (cough-cough-cough) use a new saw!

Mike

For sale is whenever they are available and dealers place their orders. I would get in touch with a site sponsor or your local and ask when they anticipate having some in. Now that the 555's are available, if that's the one you want, a local dealer shouldn't have any issues adding that to their order for you if they anticipate a need sometime soon. At the least, they could order it and you pay the shipping for it if they don't have a large order going in anytime soon.

This is a good sign! XPs should be right around the corner.

I certainly hope so!

 

[gallegosmike]

The 555 ipl shows an AT Carb and software link connection. It also does not show a standard carb. I haven't received any updated information/brochures on the saws since early this year. The early brochure didn't even show it as available on the 555/562, and the 560 wasn't even listed. The publicly available brochures at dealers show the 555/562 and have since the beginning of the year.

Hmmmm software link.... Maybe we might be able to mess around with the settings! I wonder if it will have eprom ????

Time to get your geek on!

Mike

 

[TK]

@ TKPOWER: you best be posting some photos..

I suppose I can handle that :msp_tongue:

 

[Hedgerow]

Spike60 would send ya one. :msp_biggrin:

If my dealer in Mt Groove is too slow to get em, Spike will get a call from me.

This saw really looks like a Hot Rod Tweener. And you know how I like a 'Tweener'. :hmm3grin2orange:

Well if you get one, you won't be needin' that 357 limbing saw then. I might could take it off your hands...:msp_wink:

 

[TK]

Hmmmm software link.... Maybe we might be able to mess around with the settings! I wonder if it will have eprom ????

Time to get your geek on!

Mike

Unless you fabricate your own hookup I don't believe you're going to get to play with anything. Same line as the carb tools, not gonna happen.

Along with controller the carburetor settings for different conditions, it will act as a data logger. All kinds of different running information to let us know just how "gentle" and "hardly used" these saws are when they're brought in for a "simple tuneup"

 

[sunfish]

For sale is whenever they are available and dealers place their orders. I would get in touch with a site sponsor or your local and ask when they anticipate having some in. Now that the 555's are available, if that's the one you want, a local dealer shouldn't have any issues adding that to their order for you if they anticipate a need sometime soon. At the least, they could order it and you pay the shipping for it if they don't have a large order going in anytime soon.

This is a good sign! XPs should be right around the corner.

I certainly hope so!

TK, thanks for the info. This is good news!

 

[Hedgerow]

Unless you fabricate your own hookup I don't believe you're going to get to play with anything. Same line as the carb tools, not gonna happen.

Along with controller the carburetor settings for different conditions, it will act as a data logger. All kinds of different running information to let us know just how "gentle" and "hardly used" these saws are when they're brought in for a "simple tuneup"

What's a tuneup? I thought dealers were just around to sell saws...:hmm3grin2orange:
Tuneups involve dremmel's right?...
Just picking TK:msp_tongue:

 

[sunfish]

Well if you get one, you won't be needin' that 357 limbing saw then. I might could take it off your hands...:msp_wink:

If I let her go, you'll be the first to know. But I really, really like the 357!

 

[J.Walker]

I want a 560xpg with a shorter bar, but they are belated.....

I want to set the saw up with a 68dl Total Super bar.

 

[Tiger Rag]

If I let her go, you'll be the first to know. But I really, really like the 357!

Don has an excellent 357xp! :msp_thumbup:

 

[mikefunaro]

Unless you fabricate your own hookup I don't believe you're going to get to play with anything. Same line as the carb tools, not gonna happen.

Along with controller the carburetor settings for different conditions, it will act as a data logger. All kinds of different running information to let us know just how "gentle" and "hardly used" these saws are when they're brought in for a "simple tuneup"

Are you snerious? Now big brother's going to be watching me when I saw?

 

[Tiger Rag]

Looks like $650-$700 according to the original Husqvarna press release

A former site sponsor (I don't see their ad anymore so I won't mention their name) is showing it for $749 which is what they had it up there for late last year or early this year. I suppose that is MSRP, but maybe they just inflated the price since I'm guessing they don't have it in stock and there is no "buy" button on their ecommerce website. I wouldn't pay that much for one, so I doubt they'd be able to sell for that....but what do I know.

 

[Tiger Rag]

When will they be in the pipeline for sale?????? Firewood season is about to kick off for me! And I could (cough-cough-cough) use a new saw!

Mike

Me too......LOL!

 

[Tiger Rag]

I suppose I can handle that :msp_tongue:

That would be awesome to post some pics!

 

[chrisoppie]

I was told Oct by our area rep for the new line. Letting the 357's and I think the 359's run out is the idea.

 

[mikefunaro]

I was told Oct by our area rep for the new line. Letting the 357's and I think the 359's run out is the idea.

someone better light me up sooner than that because I'm having a nic fit.

 

[SawTroll]

From what I've heard, only the 562xp will get auto tune. But I could be wrong...

My .02

Mike

Look at the IPLs - they are on Huskys US web-site.......:biggrin:

 

[sunfish]

Don has an excellent 357xp! :msp_thumbup:

Hey man! It's been a great saw, still looks new. You took very good care of it...