Stihl ES bar question

[MS460WOODCHUCK]

What is the difference between the 25'' stihl bars one having the #3003 000 4030 and the other having #3003 000 8830.:msp_confused:

 

[Evanrude]

Not seeing an 8830 here --> http://www.stihlusa.com/chainsaws/pg42and43HR.pdf

 

[Tzed250]

The 4030 has a 10 tooth sprocket nose and a green label. The 8830 has an 11 tooth nose and a yellow label.

 

[sawfun9]

I would guess that the 8830 version has an 11 tooth front sprocket since the other 88xx designations show this where the 4030 is a 10 tooth bar with the smaller tip. I'm also guessing it's a green bar versus a yellow one. It isn't listed in my 2006 catalog so it's probably older than that.

 

[MS460WOODCHUCK]

What about the 3003 000 9630? Is that a large or small tip? Also what is the difference between yellow and green marks? Is it like there safety chain marks?

 

[Roanoker494]

What about the 3003 000 9630? Is that a large or small tip? Also what is the difference between yellow and green marks? Is it like there safety chain marks?

9630 uses 84DL and has a 13 tooth nose

 

[stihlrookie]

I have an 8830

It is 12 tooth and yellow label(large tip) .050 gauge, 3/8 pitch, 84 drivers(25").

 

[stihlrookie]

What about the 3003 000 9630? Is that a large or small tip? Also what is the difference between yellow and green marks? Is it like there safety chain marks?

9630 is a large tip, yellow labeled bar. Green is for reduced kick-back tendency bars(small tip). Yellow labeled bars have larger tips allowing for easier plunge cutting but also increasing the risk of kick-back due to the larger kick-back zone(top front corner).

 

[Tzed250]

Untitled by zweitakt250, on Flickr


Untitled by zweitakt250, on Flickr

 

[Bowtie]

What about the 3003 001 9831 yellow labeled bar?

View attachment 220190

 

[SawTroll]

9630 uses 84DL and has a 13 tooth nose

Most 24" bars take 84dl.....

 

[SawTroll]

It is 12 tooth and yellow label(large tip) .050 gauge, 3/8 pitch, 84 drivers(25").

Isn't it 13 teeth? :msp_confused:

 

[MS460WOODCHUCK]

Most 24" bars take 84dl.....

Alot of older american saws with 24'' bars take 81DL.

 

[Tzed250]

It is 12 tooth and yellow label(large tip) .050 gauge, 3/8 pitch, 84 drivers(25").

Isn't it 13 teeth? :msp_confused:

The chart above clearly shows that the 8830 has an 11 tooth sprocket nose.

Stihl makes 6 different 25" bars for the 3003 mount.

 

[stihlrookie]

Oops

Isn't it 13 teeth? :msp_confused:

The chart above clearly shows that the 8830 has an 11 tooth sprocket nose.

Stihl makes 6 different 25" bars for the 3003 mount.

It is 11, sorry. Obviously I can't count when inibriated. All other stats are correct though. Cheers.

 

[stihlrookie]

What about the 3003 001 9831 yellow labeled bar?

View attachment 220190

What about it? The chart I have shows the 3003 000 9831 to be 13 tooth. Might the 3003 001 9831 be similar?

 

[Tzed250]

It is 11, sorry. Obviously I can't count when inibriated. All other stats are correct though. Cheers.

That's OK, I can't inebriate when I'm counting!!!!

 

[SawTroll]

What about it? The chart I have shows the 3003 000 9831 to be 13 tooth. Might the 3003 001 9831 be similar?

Likely just made at another factory, in another country?

 

[SawTroll]

Alot of older american saws with 24'' bars take 81DL.

Those bars really aren't 24", that just won't happen!

 

[stihlrookie]

That's OK, I can't inebriate when I'm counting!!!!

*snort*

Likely just made at another factory, in another country?

His pic did have a Made in Brazil stamp on the bar?

Where are all these bar questions coming from?