Bumper Spike Screw, Nut, and Bolt for MS170/MS180

[limited edition]

Are these fasteners actually available from Stihl? I want to install a factory MS180 bumper spike on my MS170. Don't ask why, don't question my desire.

The spike itself is easily obtained, but the fasteners I cannot find on any parts list or data base. I demand new from factory. Would my local Stihl dealer have these fasteners, or the ability to obtain them for this saw?

 

[From009to090]

Try:
9022 341 0960 Spline screw IS-MSx12
9214 320 0700 Lock Nut M5

These are from a 024.

 

[Stihl-Pioneer]

According to the ipl, the spike is held on by two self tapping screws part # 9075 478 4115.

 

[limited edition]

According to the ipl, the spike is held on by two self tapping screws part # 9075 478 4115.

The top fastener seems to be a screw. The bottom fastener seems to be a nut & bolt.

 

[limited edition]

Can anyone here with a 180 confirm how their spike is attached?

 

[Fish]

No, it is 2 of those screws, they were on a lot of different models

 

[Stihl-Pioneer]

Here is the ipl for the 170 which is the same as a 180.

 

[Fish]

Can anyone here with a 180 confirm how their spike is attached?

We just did. I think the spike is an option, it is the same one as on the 021,023,025, ms210, ms230, ms250.

 

[Big L]

Two self tapping screws on my 2011 MS180.

 

[limited edition]

Thanks guys. You've all been a big help. Now I know exactly what is needed.

Although I'm sure the plastic "spikes" are just fine on this little saw, it'll make it complete to spend the couple of bucks and have a steel spike out front.