PM sent.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
PM sent.
HittinSteel
Addicted to ArboristSite
Looking for a new style air filter kit for a 335XPT and a 1 way tank breather for a MS 200T. Have parts and cash. PM me. Thanks
rms61moparman
Addicted to ArboristSite
I have 3 029 cylinders that will clean up nicely.
Also have a like new crank and bearings for same.
Sale or trade.
Mike
Also have a like new crank and bearings for same.
Sale or trade.
Mike
xtremez
ArboristSite Guru
stihl 070/090 bar
Looking for a 50" or bigger bar .404 hard nose or roller tip if anybody has one for an 070. Have moldy green paper
Looking for a 50" or bigger bar .404 hard nose or roller tip if anybody has one for an 070. Have moldy green paper
cutfast
ArboristSite Operative
WTB Stihl 036 Pro muffler
I'm looking for a muffler for a Stihl 036 Pro.
I only need the muffler as I have a cover but will take both parts if that's what you have.
Let me know what you have and how much shipped to WI. 53508
Thanks Ron
I'm looking for a muffler for a Stihl 036 Pro.
I only need the muffler as I have a cover but will take both parts if that's what you have.
Let me know what you have and how much shipped to WI. 53508
Thanks Ron
sefh3
Addicted to ArboristSite
PM sent
Eccentric
Mister Wizard
I am in need of a good 1/2"-8 spur sprocket for my McCulloch 650 gear drive. I'd be interested in a .404 spur (or one of the mythical rim drive adaptors) for the same saw too. My saw has a worn 1/2"-7 spur now. Since I need to replace the spur, I'd like to go up on the tooth count to gain a bit of chain speed since I have a 3/1 geared saw. I can give part numbers if needed.
Looking for a 52DL and 62DL of Oregon 91VXL or Woodland 30LP, I know it can be had cheap but I want it cheaper........
EDIT:
Could also use a couple of the rubber grommets for the Homelite fuel lines.
EDIT:
Could also use a couple of the rubber grommets for the Homelite fuel lines.
Last edited:
little possum
Crash and Burn
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,167
I'm looking to trade greenbacks for a 357/359 flywheel.
Tree Sling'r
Addicted to ArboristSite
I have a 60" Cannon, old style in great condition for its age that may work for you. PM me if interested, I could send pics.
whats youre cash price, it'll look good on my 076
Mastermind
Work Saw Specialist
I could use a good 036 jug........
I have stuff to trade........lot's of stuff.
I have stuff to trade........lot's of stuff.
Scooterbum
Addicted to ArboristSite
Stuff.......huh. Got any pie? I like pie.
I have a good one that has some foriegn name on it, starts with an M I think...
Give a call.
AU_K2500
NSM
anybody wanna send me a Primer bulb for a homelite leaf blower with a Walbro carb....
jnl502
ArboristSite Operative
Tree Sling'r
Addicted to ArboristSite
Here are a couple pics of the bar, 60" Cannon. It fits on one of my MS660s, but other than that I honestly don't know about any other older saws. It could be worked over a bit to fit a large mount. I have never used it, traded work for it at one point. .063 gauge I believe.
View attachment 229762
View attachment 229763
View attachment 229762
View attachment 229763
Last edited:
xtremez
ArboristSite Guru
Originally Posted by xtremez Looking for a 50" or bigger bar .404 hard nose or roller tip if anybody has one for an 070. Have moldy green paper
I have a 60" Cannon, old style in great condition for its age that may work for you. PM me if interested, I could send pics.
Pm'ed despite the line jumpers
I have a 60" Cannon, old style in great condition for its age that may work for you. PM me if interested, I could send pics.
Pm'ed despite the line jumpers
View attachment 229768
Here is a 38 inch solid nose bar for the 090 etc. I am willing to trade.
Email mrupley at jps dot net
Here is a 38 inch solid nose bar for the 090 etc. I am willing to trade.
Email mrupley at jps dot net
Similar threads
