J.Walker
Addicted to ArboristSite
I stocked up winter weight about three years ago and this is the last gallon.
.
.
Winter Bar Oil
- Thread starter ChainLightning
- Start date
Help Support Arborist Forum:
Cbird14
Addicted to ArboristSite
I buy either chain pro or tall timber. It's what's close to me. Bought 5 gallon last spring for 7 buck a gallon. I can't see spending 3-5 buck more a gallon for the same stuff. Haven't had any problems. Cut all winter just keep it in the heated shop at night and pickup cab during the day. Try to not cut when it's sub zero. Haha need a jony 2171 cwh. :msp_biggrin:
Captain CaveMan
ArboristSite Lurker
I have always cut my regular bar oil with some 5w-20 usually whatever synthetic i get on clearance throughout the year. This stuff always does noticeably thin it but doesn't seem too much.... of course i'm a cut as I go guy, and can cut down to -30 
my saws stay in the heated inside.
Ever since going to a better quality saw i've been kicking around the idea of just running a winter bar oil....but i have been mixing 3 parts bar oil to 1 part oil.
my saws stay in the heated inside
.Ever since going to a better quality saw i've been kicking around the idea of just running a winter bar oil....but i have been mixing 3 parts bar oil to 1 part oil.
J.Walker
Addicted to ArboristSite
Like those light weight oils.
.
.
Cbird14
Addicted to ArboristSite
Like those light weight oils.
.
How much? I'm drooling... Bad. Sexiest saw ever period. awesome pic!!! Like always
allstihl
ArboristSite Guru
i run reg wt year round. keep it inside carry it in an old thermos jug in the winter. works well for me
KenJax Tree
Terraphobic
Truth being told...if its -30 degree, bar oil isn't an issue because im not going outside.
ChainLightning
Vintage Saw Stalker
Thanks for the tips everyone. Will head down to TSC tomorrow and see if they have the Husky winter weight in stock. If not, it should be soon...getting very close to winter...and its gonna hit hard this year. Last year was very light.
benp
Addicted to ArboristSite
Actually that depends. If no wind it's tolerable. I've worked all day at -20 on the thermometer and it wasn't bad at all. But there was no wind.
I don't think I would of been wanting to cut wood in that though.
Anthony_Va.
XPW Fan Club
Feel free to do whatever you want friend, but if the winter weight oil cost more then it's wasted money. The cheapest stuff you can find will work perfectly.
It depends on how cold it is and how thick the oil is to start with. usually no more than a cup per gallon. I never have to thin it though and I cut all winter long. Even though it pours in thick, it comes out of the saw all warm and toasty.....and thinned.
I feel like thin winter grade oil is just too thin once it gets warmed up in the saw. And I think it's just a sham to rob a few extra bucks out of us. I feel this way because I've ran saws of all sorts for many winters, all day, everyday on regular oil with never the first problem.
Feel free to do whatever you want friend, but if the winter weight oil cost more then it's wasted money. The cheapest stuff you can find will work perfectly.
It depends on how cold it is and how thick the oil is to start with. usually no more than a cup per gallon. I never have to thin it though and I cut all winter long. Even though it pours in thick, it comes out of the saw all warm and toasty.....and thinned.
I feel like thin winter grade oil is just too thin once it gets warmed up in the saw. And I think it's just a sham to rob a few extra bucks out of us. I feel this way because I've ran saws of all sorts for many winters, all day, everyday on regular oil with never the first problem.
Ok thanks!
Naked Arborist
Hack from way back.
We don't really have any real weather here in So. NJ. That said WalMart 8 bucks a gallon. Works from 0-90* after that we go to Stihl thick stuff 50/50. I just adjust the oilier according to the conditions, problem solved. Carry your trusty little "pocket tune-driver" never hit the woods with out it.
