Sure is quiet in here....do I need to start a fight?

[tbone75]

Just to clear this up, they are clamshell saws so they don`t have top ends per say, you change out he whole block so a whole shortblock is need as an engine swap.

Okie Dokie ! I should know that many as I have worked on. Just haven't swapped any around yet. LOL

 

[Jimmy in NC]

Just to clear this up, they are clamshell saws so they don`t have top ends per say, you change out he whole block so a whole shortblock is need as an engine swap.

Yeah I know.. clam shells are fun!

 

[tbone75]

Gotta go digging , gonna take a while fer this one ! LOL

 

[tbone75]

Looks like for a little money I can build an 025 in 021 wrapper.. try my hand at grinding.. we can be cookin' with peanut oil.

While I am digging, I will find out what 025 stuff I have !

 

[Jimmy in NC]

Dig slug dig! Watch out for the salt packs!

 

[Jimmy in NC]

While I am digging, I will find out what 025 stuff I have !

I've got MiniMac stuff to trade!

 

[tbone75]

No salt in muh shop !

 

[tbone75]

No salt in muh shop !

Just got a server error ? This thing sinking too ?

 

[tbone75]

I've got MiniMac stuff to trade!

You want shot ??

 

[pioneerguy600]

Clamshell saws are not as easy to do many mods on but the frame/chassis will accept the complete shortblock of the bigger engine, muffler mod helps a lot and just cleaning up the intake and exhaust ports helps a bit. To increase the comp on them mostly needs the piston crown built up.

 

[pioneerguy600]

No salt in muh shop !

Just got a server error ? This thing sinking too ?

Its being real slow and posts are hanging up for me, sometimes takes several mins for my post to actually take or show up on site.

 

[dancan]

There , both neighbours and my driveway are plowed .
The Bota was slow to come around today , I had the fuel filter freeze up on me but I stihl won

 

[farrell]

Guess I should work 12hrs today

 

[Jimmy in NC]

Clamshell saws are not as easy to do many mods on but the frame/chassis will accept the complete shortblock of the bigger engine, muffler mod helps a lot and just cleaning up the intake and exhaust ports helps a bit. To increase the comp on them mostly needs the piston crown built up.

Was thinking just an Intake/Exhaust Widen and clean up for a first attempt at a port job. Think they'd be a perfect candidate.

 

[Jimmy in NC]

Its being real slow and posts are hanging up for me, sometimes takes several mins for my post to actually take or show up on site.

Sometimes even with a refresh the newer posts don't show up for me. Then 15-20 minutes later there will be several all show up at once. I don't get it...

 

[pioneerguy600]

Sometimes even with a refresh the newer posts don't show up for me. Then 15-20 minutes later there will be several all show up at once. I don't get it...

For me I click on, post reply, and it will stall, then I click on the page number from one page back, let that page come up and fill , then click on the page I just posted on again and when it loads my post is there.

 

[pioneerguy600]

Was thinking just an Intake/Exhaust Widen and clean up for a first attempt at a port job. Think they'd be a perfect candidate.

It needs the muffler mod also, these saws are really badly choked up.

 

[jimdad07]

Buddy wanted to run my 288 a little...so we did today. He ran it and then I ran it some. Figured someone in the fight thread better run a damn saw today!

Sent from my MiniMac running E-85!!

Hopefully be out this weekend doing storm cleanup.

 

[roncoinc]

Can you wear them under those tight smurf shorts....LOL

Hey !! your woodstove needs attention !!

 

[sefh3]

Geeze we just get hit with a 10" snow storm and now are receiving Winter Storm Warnings for another 8-12" starting Saturday night into Sunday.