Swap meet...

[Jimmy in NC]

Anybody have the parts to convert a TS760 to an 076? Have poulan bow bar and stihl parts and dead presidents to trade....

Sent from my intellectually challenged "smartphone".....

Convo

Sent from my MiniMac running E-85!!

 

[Jimmy in NC]

Anybody have the parts to convert a TS760 to an 076? Have poulan bow bar and stihl parts and dead presidents to trade....

Sent from my intellectually challenged "smartphone".....

Convo...

Sent from my MiniMac running E-85!!

 

[sefh3]

Anybody have the parts to convert a TS760 to an 076? Have poulan bow bar and stihl parts and dead presidents to trade....

Sent from my intellectually challenged "smartphone".....

I'm assuming you need the oiler gear drive?

 

[blueberrymuzik]

What do you need?

I need the carb air filter cover and the limit stop for the handle (if you have the IPL, it is #13 on drawing "H")

 

[Duke Thieroff]

Anyone interested in some NOS Drive sprockets?

I'll give the part numbers, as I don't have the lookups for what they fit

Oregon
21942 (Mac?)

Herr
B22A-K8
N116-A7 3/8 7

COMET
D205N407 (PIONEER?)
D207N-407 (PIONEER?)
D179B-437 (MAC?)
D116N-378 (MAC) Looks like 3/8-8T
D206N-437 (PIONEER) 7/16 pitch? 8T Looks very slightly used.

Norman Prince Associates
N207-A7 (PIONEER?) I have 2 of these
N205-A8 (PIONEER?)

Pioneer Branded NOS
472230 on the bearing, 298 on drum, looks like .325-8


Chris

 

[nmurph]

I'm looking for a PTO side crankcase for an 064. I need a spike for the same side as well...got cash or maybe some 346-family parts (no cylinders or crankcases).

TIA,
Neal

Bump.

 

[cutforfun]

looking for the top trigger lock or pressince lever for a 2101 husqvarna, parts to trade or cash

 

[jeepyfz450]

I have a white top husky 61 rancher PHO. Missing chain brake handle. Decent condition. No spark. Don't know anything about the saw took it in on trade. Looking to trade it for Stihl parts/bars. Can send pics.

 

[machinisttx]

Was someone looking for some Echo 302 parts? I picked up a near complete carcass today for $5. I'll have more time to look it over tomorrow, but it seems to be in decent shape.

I need an AF cover for a MS250 if anyone has one.

 

[Flat47]

Trade you for a gallon of maple syrup for the Husky 61.

Sent from my C771 using Tapatalk 2

 

[Flat47]

I have a white top husky 61 rancher PHO. Missing chain brake handle. Decent condition. No spark. Don't know anything about the saw took it in on trade. Looking to trade it for Stihl parts/bars. Can send pics.

Trade you a gallon of maple syrup

Sent from my C771 using Tapatalk 2

 

[Jacob J.]

Was someone looking for some Echo 302 parts? I picked up a near complete carcass today for $5. I'll have more time to look it over tomorrow, but it seems to be in decent shape.

Aaron (Eccentric) was looking for 302 parts but I got him covered with a carcass I have here. Of course, he could be talked into building a second...

 

[bplust]

Trade you a gallon of maple syrup

Sent from my C771 using Tapatalk 2

Grade A or B? I prefer B, I'm just curious as to what you have.

 

[Jacob J.]

Grade A or B? I prefer B, I'm just curious as to what you have.

A gallon of home-tapped maple syrup is pricey around these parts. We usually stick with local honey as it's much cheaper.

 

[Flat47]

All we have left is Maine Extra Dark, aka B.


Sent from my C771 using Tapatalk 2

 

[Wagnerwerks]

I'm looking for a 315 echo recoil for a father son saw project. Same family as a 302? Can anyone confirm that?

 

[jeepyfz450]

Trade you for a gallon of maple syrup for the Husky 61.

Sent from my C771 using Tapatalk 2

I appreciate the offer. i help my buddies make syrup every year so we have lots.

 

[Brushwacker]

I have a white top husky 61 rancher PHO. Missing chain brake handle. Decent condition. No spark. Don't know anything about the saw took it in on trade. Looking to trade it for Stihl parts/bars. Can send pics.

What does the PHO stand for ? Does it have good compression ?
I have a 61 carcass I am pretty sure and think it has top end damage and no brake handle, probably missing more parts. May have a good ignition system. Wouldn't take me long to check it out if someone is interested . I would rather trade mine off, but don't think I need any thing other then I could use some new stihl RM in 3/8 .050.
May be I'd trade if your interested in .325 pitch stihl mount bars and or some .325 pitch chain in various brands. I have some new, extra 3/8 .050 Stihl RS chains also. Any other particular Stihl parts you lack ? I have this and that, would have to look through my accumulation for spare parts.

 

[husqvarnaguy]

Still looking for a good used 346 xp cylinder. I have a few parts and cash to trade. Pm me if you have something.

 

[machinisttx]

What does the PHO stand for ? Does it have good compression ?
I have a 61 carcass I am pretty sure and think it has top end damage and no brake handle, probably missing more parts. May have a good ignition system. Wouldn't take me long to check it out if someone is interested . I would rather trade mine off, but don't think I need any thing other then I could use some new stihl RM in 3/8 .050.
May be I'd trade if your interested in .325 pitch stihl mount bars and or some .325 pitch chain in various brands. I have some new, extra 3/8 .050 Stihl RS chains also. Any other particular Stihl parts you lack ? I have this and that, would have to look through my accumulation for spare parts.

powerhead only