porsche965
Addicted to ArboristSite
Thanks MM
661 Oil Test 32:1 vs 40:1 vs 50:1 ?
- Thread starter redbull660
- Start date
Help Support Arborist Forum:
Thanks MM
KG441c
Keith
What did redbull run? 42to1?
D
Deleted member 83629
Guest
bel ray is 50 weight along with R50 standard premix oil is 20 weight.
Mastermind
Work Saw Specialist
I don't have any details.
If anyone is wondering why I bowed out of this thread the other day........
I just hated the way some folks were treating each other. We can do better.
This testing of RedBull's has been a real eye opener. I was convinced he was wacked out when he announced his results. But it appears that I was wrong.
D
Deleted member 83629
Guest
maybe the bel ray was causing autotune problems in the husky saws you ported?
KG441c
Keith
Ya folks have a way of tearing each other apart around here? His test was an eye opener wasnt it? That yamalube , k2, lucas, and thinner oils should do well at 32to1
Mastermind
Work Saw Specialist
Could be.......but they normally ran good till they got to 10 hours or so. And on a lot of different oils. The ones that I ported aren't the only ones that had the bog issues either.......
porsche965
Addicted to ArboristSite
This testing of RedBull's has been a real eye opener. I was convinced he was wacked out when he announced his results. But it appears that I was wrong.[/QUOTE]
Takes a real man to make a statement like this. I've had to do this a few times. I respect this statement.
....and yes, we are all better than some of the degrading posts. We'll said MM.
porsche.
Takes a real man to make a statement like this. I've had to do this a few times. I respect this statement.
....and yes, we are all better than some of the degrading posts. We'll said MM.
porsche.
D
Deleted member 83629
Guest
ok then i guess that rules that out you willing to try 32:1 with some lucas? i have been using it since last september and it burns super clean and leaves everything oily inside.
and it pretty cheap. me and chris ( kendaxtree ) is hooked on it.
Mastermind
Work Saw Specialist
I'm gonna use the rest of this Yamalube.......then I'll try a few quarts of Lucas. From what Matt says, I'm pretty sure I'll like it.
KenJax Tree
Terraphobic
I'm using Maxima Super M right now, its a synthetic blend like Lucas but has 60% ester (K2?) and looks better on paper so we shall see[emoji6]
Ron660
Addicted to ArboristSite
Motul 710 has a similar viscosity as other "chainsaw" oils. That would be a good test between 710 and 800 at 32:1 and 40:1.
Its garbage..
Wouldn't call it garbage, but I sure don't care for it. More comparisons will be needed. No I'm not going to be the guy to step up an do it anytime soon.
I'm running K2 right now. I may try to make some vids tommorow at 32:1 and 50:1 to compare tomes with my stock 562xp
Did someone say oil? Here's what I have on hand, with a bottle of Motul 710 on the way.
Rookie!!!Did someone say oil? Here's what I have on hand, with a bottle of Motul 710 on the way.
redbull660
Addicted to ArboristSite
Just got back. 1:30am. left at 3:30am yesterday lol . I haven't even checked the footage. I know it was close. I'll upload in the morning. I did cuts and Hedgerow did cuts. 2 diff logs.
Took some other vids of other guys running various ported saws. Did some other tests as well. Can't wait to look at the footage but im dead tired.
Took some other vids of other guys running various ported saws. Did some other tests as well. Can't wait to look at the footage but im dead tired.
DexterDay
Addicted to ArboristSite
MS 460 FTW
