you tried kroil and/or heat on it yet?
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
2171 pops on a prime.
Out of mix, need spade terminal for kill switch, etc.. Geezer woman took off with the car.[emoji16]
Out of mix, need spade terminal for kill switch, etc.. Geezer woman took off with the car.[emoji16]
Chef: You run 1/4"?
I have two Stihl 3849 660 X020 packages of presets.
I have two Stihl 3849 660 X020 packages of presets.
Opened the Mall NOS grab bag I got off evilbay.
Bunch of 9/16" and 7/16" cutters, ect..
Bunch of 9/16" and 7/16" cutters, ect..
sawnami
Addicted to ArboristSite
Go the health food store and get a bottle of wintergreen oil. Never seen anything better. Seen it used for removing frozen medium duty truck king pins and diesel injectors that have broken every puller known to mankind trying to get them out.
Sent from my SM-N910V
WKEND LUMBERJAK
Addicted to ArboristSite
The 2171 runs but without a top cover and air filter, no load tests.
Coil puts out very weak spark at cranking speed.
Temporary splice in 5mm plug wire.
1/2 of a 16 ga butt splice with the cores lapped over each other. Later I will shorten the lead and cover with 1/4 hose and liquid tape. Handy now for shutdown. Just short it with a screwdriver.
The comp release valve stayed put.[emoji28]
Coil puts out very weak spark at cranking speed.
Temporary splice in 5mm plug wire.
1/2 of a 16 ga butt splice with the cores lapped over each other. Later I will shorten the lead and cover with 1/4 hose and liquid tape. Handy now for shutdown. Just short it with a screwdriver.
The comp release valve stayed put.[emoji28]
WKEND LUMBERJAK
Addicted to ArboristSite
Just tore down the 2150 Carl donated have parts ordered.
Whats the best way to fix negligence on exhaust bolts striped and heli-coil failure on cylinder.
Heli-coil was not my failure.
Whats the best way to fix negligence on exhaust bolts striped and heli-coil failure on cylinder. Heli-coil was not my failure.
Make a thread insert from a suitable larger screw/bolt.
WKEND LUMBERJAK
Addicted to ArboristSite
Hedgerow
HACK
Or lock tite....
Too late again...
Too late again...
sawnami
Addicted to ArboristSite
Big-serts by time-sert.Just tore down the 2150 Carl donated have parts ordered.
Sent from my SM-N910V
Browse thread inserts with your local O'Reilleys counterman.
O'Reilleys and Ace hardware are my go to chainsaw parts suppliers. LOL
O'Reilleys and Ace hardware are my go to chainsaw parts suppliers. LOL
WKEND LUMBERJAK
Addicted to ArboristSite
My OReilly's here is a xxx xxxx Joke
. All the counter people know is how to start a car. And you better hope it don't have a manual choke. went in there last week to get a electric fuel pump 2-7 Psi frame mounted 12 volt. they all looked at me like I was from outer space . Did I say they are idiots.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Weld it.Just tore down the 2150 Carl donated have parts ordered.
Says the fellow with a TIG in his machine shed.........................?
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Nope, no me..
sawnami
Addicted to ArboristSite
I know what you mean. I've known the CEO for 35 years. I'm so tempted to say "Let me give Greg a call and see if he can look it up for me" and watch the look on their face. [emoji57]My OReilly's here is a xxx xxxx Joke
Sent from my SM-N910V
