KG441c
Keith
Chris Id be lying if I said I knew! Lol! Dont think the guy that gave it to me will know either but Id be willing to bet Stihl orange bottle
661 Oil Test 32:1 vs 40:1 vs 50:1 ?
- Thread starter redbull660
- Start date
Help Support Arborist Forum:
KenJax Tree
Terraphobic
Ok as far as rust/corrosion during storage which of these is good and which isn't.
Pro Honda HP2
Yamalube 2R
Amsoil Dominator
I use my blower for light snow so i like to keep it full but may not use it much so which of these oils i have protects the best.
Pro Honda HP2
Yamalube 2R
Amsoil Dominator
I use my blower for light snow so i like to keep it full but may not use it much so which of these oils i have protects the best.
Trx250r180
Saw polisher
I would not use a racing branded oil for a storage oil ,most do not have stabilizers and extra additives
This is the only company i have seen that sells an oil made for storage ,or just mix reg oil 20 to 1 if storing
http://dumondetech.com/portfolio/two-stroke-break-in-storage-oil/
This is the only company i have seen that sells an oil made for storage ,or just mix reg oil 20 to 1 if storing
http://dumondetech.com/portfolio/two-stroke-break-in-storage-oil/
Ron660
Addicted to ArboristSite
Probably cheapest he could find
KG441c
Keith
Deleted head gasket and stuck cylinder back on and check squish. .028. Pop 175psi compression with a .028!! Alil squish cutting and she will be strong!
Ron660
Addicted to ArboristSite
Why did it stop running?
KG441c
Keith
Dont know that it had. Guy just found it like this
KenJax Tree
Terraphobic
It won't be completely stored, i will use it but it might sit for a month or 2 months in between uses.
I guess i should've said which one can sit for a month or so and not corrode anything.
smokey7
jack of a lot ace of a few
Where did you find it at that price? I can gwt gallons for 18.00 but gotta buy 4 at a time.
Trx250r180
Saw polisher
I have had a saw sit 6-9 months with h1r in it ,and it was fine ,started right up ,i would think at 32 to 1 just let it idle for a couple minutes to coat stuff good ,and you be good to go .
Jimbo209
ArboristSite Guru
Gees Now this has aspects of a build thread, it is becoming like some of the multi purpose oils mentioned
redbull660
Addicted to ArboristSite
boat oil 32:1 aka schaeffers 7000 tcw3
this 661 has only been run on schaeffers 32:1 ...so this is after the first 6 tanks. Been cutting with a 30" tsumura .404 chain
ported 880 run on the schaeffers 32:1 12000 on the tach with a 6' bar
this 661 has only been run on schaeffers 32:1 ...so this is after the first 6 tanks. Been cutting with a 30" tsumura .404 chain
ported 880 run on the schaeffers 32:1 12000 on the tach with a 6' bar
Attachments
porsche965
Addicted to ArboristSite
You could lighten that ratio up a bit from those pics. 38:1 or so? Might find more performance in your 661
KG441c
Keith
How does the 661 do with the 404?
porsche965
Addicted to ArboristSite
Boat oil.... just don't add water RedBull.
redbull660
Addicted to ArboristSite
.404 is the SH*T !!!
just ask TRX
usually it's just as fast as 3/8ths...depends on the wood. Sure does stay sharp and last longer...can take a lot more abuse that's for sure.
Attachments
Trx250r180
Saw polisher
lot of soot for 6 tanks
redbull660
Addicted to ArboristSite
muffler wasn't new. This is my modded muff I put on...it has a lot of tanks from multi saws on it.
KG441c
Keith
Do u run full comp or skip? I wanna try 404 skip on 25" bar with my 390 for noodling
redbull660
Addicted to ArboristSite
full comp nice for cutting. self feeds easily.
RSLF is the cats meow on noodling. damn I wish I had a picture of the pile of firewood I've done for my friend. No splitter required. I just noodle it all.
