Stacpa17
ArboristSite Lurker
Want to pick one up next week. I see they added the vent. Seems to be the 60cc of choice.
Has the hot start problem been solved on the newer 562xp?
- Thread starter Stacpa17
- Start date
Help Support Arborist Forum:
Redstar409
ArboristSite Lurker
I hope so. I just picked one up yesterday. Mercifully, nothing in the manual regarding the crazy 3-5 min full throttle running for autotune to calibrate itself.
Stacpa17
ArboristSite Lurker
Hopefully that is just a one time thing or is it every time you start the saw?
Redstar409
ArboristSite Lurker
Used to be a one time thing, when new. No longer needed.
SierraMtns
ArboristSite Operative
I find they start the easiest with the de-comp plugged. And I don't bother touching the primer air purger either. Fires right up.
Jet47
ArboristSite Operative
Added a new one to my stable Wednesday. Worked flawlessly yesterday.
Redstar409
ArboristSite Lurker
Just fired mine an hour ago. This saw is very very strong. Started on 4th pull, idled perfectly and really ripped through 20" oak right out of the box. The 562 may be my new favorite.
porsche965
Addicted to ArboristSite
I have two wrap models and have no problems under 90 degrees or so. Warmer than that I shut it off with the choke, set on high idle to re-Start and she always starts up, ported and un-ported saws.
The 562xp is a really hard saw not to like and quite capable up to, if you have to, run a 28" bar full comp chisel chain. Not fast but will get by.
The 562xp is a really hard saw not to like and quite capable up to, if you have to, run a 28" bar full comp chisel chain. Not fast but will get by.
D
Deleted member 117362
Guest
^what he said.
Never had a problem.
Never had a problem.
