Sold Sold

[cuinrearview]

Bump for a price drop. $45 shipped now

@cuinrearview Tim do you need a 353 kit ? Or a popup piston for a 036, 261, or 461 ?

I need a red fuel tank so I can run the last 353 kit. It was very promising(four stroking at 14k+), and that had a flat top piston.

 

[Overkill338]

I need a red fuel tank so I can run the last 353 kit. It was very promising(four stroking at 14k+), and that had a flat top piston.

I'll let you know if I find any of those things!

 

[Overkill338]

I need a red fuel tank so I can run the last 353 kit. It was very promising(four stroking at 14k+), and that had a flat top piston.

Tim do you need any starter rope for those?

 

[cuinrearview]

Tim do you need any starter rope for those?

I'm good, thanks

 

[Overkill338]

372 Big bore popup
661 popup
660 popup
026 44mm

Still available if anyone is interested.

 

[Overkill338]

Hey finally got time to sit down and get everything ready to assemble the 353 I bought that hyway Kit from you for to find this....
See the flat spot that travels the entire distance out to the end of where the intake manifold clamps.... I’m not too happy with this , this is never going to seal and even if it would with constant vibration it won’t seal for long ... I’m a certified Stihl tech , work on saws everyday all day an I can tell you there is no other aftermarket let alone oem kit that has this depicted flat spot! I’m not even going to waste my time to try and install this knowing there will likely be an air leak ... so my next question is how do we go about making this right??? Is there anyway you can go thru your purchaser to validate the year warranty hyway boasts they have???

PM all this to me, and I'll see what I can do.

 

[Overkill338]

I still have an 028 kit, a 660, and one of the 372's.

 

[Poulan_man85]

I may be interested in the other 372xp bb kit, i have a few 372xp's here i will be going over when time permits it.

 

[shortfuze82]

Thanks again recurved the kit today

 

[av8or3]

Is that an 028 or an 026? I’m lookin for an OEM 026

 

[Overkill338]

Is that an 028 or an 026? I’m lookin for an OEM 026

I have both, but not oem

 

[Overkill338]

I still have a 372 BB Popup
660 popup BB
026 44mm
028
261 popup
And a 390 Stihl.

Then a popup piston for a 461, 261, and 036.

 

[shortfuze82]

How much for the 261 pop up

 

[Overkill338]

I still have a 372 BB Popup
660 popup BB
026 44mm
028
261 popup
And a 390 Stihl.

Then a popup piston for a 461, 261, and 036.

Also found a big bore 460 kit, that's missing the circlips

 

[Overkill338]

I will bump this one last time

 

[Poulan_man85]

Interested in the 036 popup, thanks

 

[Jerseyshure]

That 261 Pop-up still available?

 

[Jerseyshure]

Anyone need a &44mm 026 kit, I ordered the wrong damn size.

I am possibly wanting this piston. Have to check with my buddy and see if he the 026 cylinder is any good yet. If its copasetic and he needs it, I'll reply with the quickness.

Thx Joshua

 

[Overkill338]

I am possibly wanting this piston. Have to check with my buddy and see if he the 026 cylinder is any good yet. If its copasetic and he needs it, I'll reply with the quickness.

Thx Joshua

It's a piston and cylinder kit.

 

[Jerseyshure]

It's a piston and cylinder kit.

Hyway or Farmertec kit