It's in my basement, so anything flammable is out.About 20 parts kerosene to one part ATF to decrease flash point.
It's in my basement, so anything flammable is out.About 20 parts kerosene to one part ATF to decrease flash point.
Yep. Also don't like stuff that stinks in the house.It's in my basement, so anything flammable is out.
Gas chainsaws stored in house only after drained and clean; also inside cases.Wife won't allow anything chainsaw related into the house, especially since we moved recently....I guess she learned the hard way. At least I never fired them up in the house...
But maybe the best way is to check a aqueous parts cleaner site. Get something made for the application. The more heat, the better they work. But there's evaporation and burnt hands to contend with.I put Zip degreaser and Dawn in the tank.
It does clean with soaking and scrubbing. It needs heat. I'm searching for a 115 volt heater that I like.
If the paint is chalky on metal parts, it will take it off if scrubbed on to much.
I put Zip degreaser and Dawn in the tank.
It does clean with soaking and scrubbing. It needs heat. I'm searching for a 115 volt heater that I like.
If the paint is chalky on metal parts, it will take it off if scrubbed on to much.
Thanks. I'm looking at it now. Sounds promising.But maybe the best way is to check a aqueous parts cleaner site. Get something made for the application. The more heat, the better they work. But there's evaporation and burnt hands to contend with.
Life is too complicated.
Thanks much. The Kat's magnetic I really like.
Many thanks.
I wish you had that idea 20 minutes sooner.Crock. Pot. Goodwill.
Philbert
Yes you did and I read it.(See Post #8)
Philbert
Enter your email address to join: