2000ssm6
Stihl User
Prices are shipped unless noted, let me know a zip for quote. Payments are pp f&f NOT GS, check or m/o. All listed is available unless noted.
026/260
026 muffler, would be good for a stock appearing race saw, lots of flow, $25
026 oem Mahle 44mm p&c, piston is new but has some discoloring, needs rings, $125
026 Tree Sling'r ported oem Mahle 44mm p&c, piston is new but has some discoloring, needs rings. Squish band not cut, $175
260 oem piston kits, 44.7mm, $50 shipped each. These are new but may be discolored. 12/23, one left.
All these are used but clean inside unless noted
1. 044, no decomp, Stihl "B" cylinder. $145
2. 044/440, decomp, Stihl "B" cylinder. $145
3. 044, no decomp, slant fin, Not K&S, Mahle "A++++++" cylinder. $235. Not sure what saw this is from, could be a 10mm or 12mm.
4. Sold
5. 066/660, no decomp, Stihl "A" cylinder. Thin plating and a mark above exhaust port, would be a good practice cylinder for porting or if a company does plating. $30
Not pictured, a 046/460 with decomp, A cylinder. Thin plating, would be a good practice cylinder for porting or if a company does plating. $30
026/260
026 muffler, would be good for a stock appearing race saw, lots of flow, $25
026 oem Mahle 44mm p&c, piston is new but has some discoloring, needs rings, $125
026 Tree Sling'r ported oem Mahle 44mm p&c, piston is new but has some discoloring, needs rings. Squish band not cut, $175
260 oem piston kits, 44.7mm, $50 shipped each. These are new but may be discolored. 12/23, one left.
All these are used but clean inside unless noted
1. 044, no decomp, Stihl "B" cylinder. $145
2. 044/440, decomp, Stihl "B" cylinder. $145
3. 044, no decomp, slant fin, Not K&S, Mahle "A++++++" cylinder. $235. Not sure what saw this is from, could be a 10mm or 12mm.
4. Sold
5. 066/660, no decomp, Stihl "A" cylinder. Thin plating and a mark above exhaust port, would be a good practice cylinder for porting or if a company does plating. $30
Not pictured, a 046/460 with decomp, A cylinder. Thin plating, would be a good practice cylinder for porting or if a company does plating. $30