bobbyb13
ArboristSite Operative
Got a 026 for free with a smoked piston and Cyl. I ordered the $89 kit from Bailey's . 1st question- Have you used one of these? 2nd- when a saw has badly scored the cyl. do you clean or wash out the crankcase?
Lakeside, O great and wonderful Guru of the Stihl
- Thread starter bobbyb13
- Start date
Help Support Arborist Forum:
Fish
Tree Freak
When trying to conjure him up you need to use caps like this.
"Great and Wonderful".....
Try that and it will work......
"Great and Wonderful".....
Try that and it will work......
ShoerFast
Tree Freak
- Joined
- Nov 14, 2005
- Messages
- 25,843
- Reaction score
- 17,230
Yes, using the enchantment helps, but mentioning after-market cylinders and jugs dose not make him appear in a puff of smoke. Sort of takes public transportation , Lake likes 'Stihl' Parts, from past post. That may be one of the differences of us cheep-skate mortals?
All hail Lakeside , All hail Lakeside!
livewire
Addicted to ArboristSite
.....or sacrifice 6 of His favorite Northwestern microbrews
Actually....that might make him mad......better just send them to him
bobbyb13
ArboristSite Operative
My error.
Lakeside, O KIND LEADER OF THE UNWASHED MASSES, O GREAT AND FEARLESS LEADER, please come to my most unworthy assistance. I repeated this 7 times while prostrate facing west. Will that do it?
Lakeside, O KIND LEADER OF THE UNWASHED MASSES, O GREAT AND FEARLESS LEADER, please come to my most unworthy assistance. I repeated this 7 times while prostrate facing west. Will that do it?
Try sacraficing a Husky or two.
Fish
Tree Freak
Using words like "unwashed" and "prostate" will do the trick, he is quite kinky.
Gumnuts
ArboristSite Guru
- Joined
- Aug 4, 2007
- Messages
- 841
- Reaction score
- 136
White hats ???
OK - I'll start the ball rolling
He's freely and willingly helped me and many others.He's brought to
the table more good grits than most.
Me thinks his comeback will be a John Wayne
Luv ya work John
No secret hand -shake here.
Just thanks Lakeside53
Keep getting Texas chainsaw massacre......damn :computer:
OK - I'll start the ball rolling
He's freely and willingly helped me and many others.He's brought to
the table more good grits than most.
Me thinks his comeback will be a John Wayne
Luv ya work John
No secret hand -shake here.
Just thanks Lakeside53
Keep getting Texas chainsaw massacre......damn :computer:
sawinredneck
Addicted to ArboristSite
Not sure why Andy keeps comming back here, all he does is answer questions from morons like me. But we thank him
Just Mow
Don't touch my Willie !!!
Not sure why Andy keeps comming back here, all he does is answer questions from morons like me. But we thank him
I think he likes hanging out with morons like you. You make his day easier and more fun.
Fish
Tree Freak
He will wait until there are another 10 threads of pure worship, then he
will make a post like he is Elvis wearing the pope's hat, sitting in the back
of Sinatra's limo, and all here will will regail, and write epistles to their brothers.
Or if he is in a bad mood, he will watch Andy Griffith and drink some beer.
will make a post like he is Elvis wearing the pope's hat, sitting in the back
of Sinatra's limo, and all here will will regail, and write epistles to their brothers.
Or if he is in a bad mood, he will watch Andy Griffith and drink some beer.
Fish
Tree Freak
I think he likes hanging out with morons like you. You make his day easier and more fun.
ouch...
joatmon
Addicted to ArboristSite
.....or sacrifice 6 of His favorite Northwestern microbrews
Oh great. Soon as he lifts the top, Gary's gonna be here!
Last edited:
chowdozer
Addicted to ArboristSite
Just Mow
Don't touch my Willie !!!
He needs many beers. Hard at work.
Lakeside53
Stihl Wrenching
huh? forget great and wonderful...where's the beer?
Sorry.. I was busy all day disassembing and hauling yet another bridgeport mill to my place for restoration...
Ah.. a new abused gem...
Here's everything except the base column... about 1500lbs..
AS TO THE ORGiNAL QUESTION... No.. I haven't used the Taiwan/chinese 026stuff. I've seen plenty and was not impressed, but.. it's only a 50cc saw so they'll likey work. Plenty of genuine mahle/stihl sets around for $80-110..\
And... go easy on washing out the crank case... I do sometimes.... fill it with mix and flush well.. but it can pack crap between the bearing and seals. If the seals are out, no problem.
Sorry.. I was busy all day disassembing and hauling yet another bridgeport mill to my place for restoration...
Ah.. a new abused gem...
Here's everything except the base column... about 1500lbs..
AS TO THE ORGiNAL QUESTION... No.. I haven't used the Taiwan/chinese 026stuff. I've seen plenty and was not impressed, but.. it's only a 50cc saw so they'll likey work. Plenty of genuine mahle/stihl sets around for $80-110..\
And... go easy on washing out the crank case... I do sometimes.... fill it with mix and flush well.. but it can pack crap between the bearing and seals. If the seals are out, no problem.
Last edited:
Just Mow
Don't touch my Willie !!!
Sorry.. I was busy all day diassembing and hauling yet another bridgeport mill to my place for restoration...
Ah.. a new abused gem...
Here's everything except the base column... about 1500lbs..
AS TO THE ORGiNAL QUESTION... No.. I haven't used the Taiwan/chinese 026stuff. I've seen plenty and was not impressed, but.. it's only a 50cc saw so they'll likey work. Plenty of genuine mahle/stihl sets around for $80-110..
Bout time you showed up
Poley4
ArboristSite Guru
Nice old step pulley head. How many of those are you going to restore? Well at least its not a cheap Taiwan copy, that good old USA iron!
Lakeside53
Stihl Wrenching
Well.... I bought it for parts. BUT.... it's in decent shape where it counts so I'll build this one up also.. So now I need ANOTHER for spares... This is MUCH worse than chainsaw disease.. and much more expensive...
Here's the prior one.. after a lot of work... and that was just cleaning and sorting... the "fun" is next...
Last edited:
