Mac B.
ArboristSite Operative
I have a 026 pro that I am working on for a buddy that was running fine. He run out of gas and filled up and said the saw starting acting like it is now. It cranks and idles fine but as soon as you give it throttle it acts like it is hitting a rev limiter and will not rev up. Like I said it will sit and idle all day. I changed the plug and tried readjusting the carb with no luck and with the air filter off you can feel fuel coming back on my hand out of the carb when you give full trottle. It seems really rich so I am wondering if it is the coil?? Do these go all the way out or just under a load? I also dumped the fuel out and added some of mine with no change.
Mac
Mac