Sold 066 Redlight

[jughead500]

Ok guys got to get this batch sold.truck laid down got to pay for a work truck.
026 very very good shape.piston looks like new. $325 shipped
029 non super looks good also piston looks like new too. $325 shipped PHO or $400 shipped with new 20” 3/8 Stihl bar and chain.
066 redlight has dual port muff,dual dawgs,non original decomp cylinder.don't know if its a mahle,ks or after market yet.piston looks good no scoring.getting spark but just pops with some mix down the carb.believe that the flywheel may be double keyed and its in the wrong slot.i will check it out.chunk out of flywheel side case on the front in front of the oil tank. Sold PHO $350 shipped
034 non super.freshly rebuild with 1 tank ran through it. new stihl parts.piston air filter etc.new oregon bar and stihl chain.tillotson carb,closed port cylinder.1 crack in case below clutch.shouldn't effect anything. $400 shipped.
Try to get pictures tomorrow.if any interest pm me or text 423-957-6028

 

[ELECT6845]

I sent you a PM and text

 

[fearofpavement]

You need to fire your marketing director, lol

 

[Jon1212]

Free Bump for a number one Goofball.

 

[chevybob]

Pics of the 066?

 

[cus_deluxe]

Dude, what rim do you run on that piltz racing ms360? is that the 25 pin rim or the 28 pin?? Bump for a bunch of saws that dont need a bump from a guy like me.

 

[skippysphins]

Pm sent

 

[Jon1212]

Dude, what rim do you run on that piltz racing ms360? is that the 25 pin rim or the 28 pin?? Bump for a bunch of saws that dont need a bump from a guy like me.

GLWFB (Good luck with free bump)

 

[jughead500]

Thanks from the number one piltz racing goofball..........ur uh wait! pictures in the morning.was kind of using the post as a draft.lol traded one of my pized saws for 3 now just have to unload to work.you guys know i'm onthe straight and narrow.i wouldn't let a saw go that wouldn't be in my collection.these are nice.....well except for the 066 but looks like it has some potential. Pictures as soon as i get a chance in the morning.pm's will be answered in the order recieved.first pm has 1st priority.

 

[jughead500]

You need to fire your marketing director, lol

He's fired Herman.i'm in charge now.lol

 

[jughead500]

Ok some pictures of the redlight.more in a few

 

[jughead500]

150 lbs before my tester leaked down.cylinder 54zn12 w2.single key flywheel.non redlight coil.retimed and still only popped with mix in the carb

 

[chevybob]

Identical to my last 066. Saw popped and never ran. Never did figure it out.

 

[jughead500]

066 still available.pictures of the rest soon.

 

[jughead500]

Ok ive tried all day to attach pictures of the other saws but it wont let me.ill just make this the 066 thread and seperate the other saws.

 

[Mad Professor]

Check the ser# on flywheel and coil, might be a mismatch

 

[chevybob]

I have the list of compatible coils and flywheels if you want it.

 

[jughead500]

Yeah send it to me.i'll try to pop the flywheel later when i find my puller.

 

[Jeremiah]

I had that with a redlight 66
Ran but no power.. sold it cheap to a friend.. he got it running with the right coil
Milled the cylinder light port dual port muffler. Am jealous...

 

[jughead500]

I had that with a redlight 66
Ran but no power.. sold it cheap to a friend.. he got it running with the right coil
Milled the cylinder light port dual port muffler. Am jealous...

Here's you another one.lol