24" Sandvik Bar

[glenn12]

I have a brand new 24" Sandvik Roll-Top bar. On it is stamped:
1778-63 1.5mm/058"/3/8" 76DL
This is a D010 bar mount and fits partner saws such as 7000, p55, etc. This bar has been hanging in my shop for some time and I don't have a saw that it fits, I also don't know of anyone with a saw that it will fit as well. My question is will this fit other types of saws? I would like to use it on my pioneer p52 but it takes a D007 mount. It seems like it may fit bar mount D009 for husky 266, 272,395, etc except for the placement of the oil hole. Could a new hole be drilled and the old one welded up? What would you do?

 

[HiOctane]

Just drill a new hole and dont bother weld up the other one.

 

[Rob Barnet]

Or sell it to me, all these years later..., haha

 

[SawTroll]

Oregon lists both the D009 and the D010 for those Partner saws, despite the oiler holes are in slightly different places. Both have 9 mm slots, nominally.

76 dl indicates a called length of 22", which barely is over 21" in reality.