Hillbilly Rick
ArboristSite Operative
Today while logging with stihl 460 w/20" bar I noticed the oil tank was half full when I refueled. I normally run 1:1. I cleaned the oil port and everything under the cover and went back to work, the next thing I know the chain is dry. I removed the bar and started the saw and it wasn't oiling. Went to the shop, cleaned the tank well, had some sawdust in it, then cleaned the filter.Used the air compressor to try to blow out the port, refilled with oil and fired up the saw and still no oil. I hope it's not the oil pump. If so what does it take to fix it?
Any help is greatly appreciated.
Any help is greatly appreciated.