460 spike help

[micah5634]

I just got home with my new ms460.Iam wanting a outside spike to match the one that came on the saw. I did a search and all i found was part numbers for the larger spikes.I did find the part number for the chain catcher
11226507700. my dealer tried to look it up but was not able to find a good part number.

 

[gregz]

Just go get the big spike kit !!
460 big spikes
1122 664 0506
1128 664 0501
catcher
1122 650 7700
and don't forget the DP cover
1128 140 0801

 

[2000ssm6]

I had a small dual dawg setup on my old 044 but don't see the part numbers in any of the IPLs. Be careful choosing the outer dawgs, the 044/440 and 046/460 are different. You may have to make one for the outer to match the small inner. I say go with what Gregz said.

I will post back if I find any useful info.:biggrinbounce2:

 

[Jacob J.]

Just go get the big spike kit !!
460 big spikes
1122 664 0506
1122 664 0510
catcher
1122 650 7700
and don't forget the DP cover
1128 140 0801

Actually the outer large spike on the 460 is an 1128 number: 1128 664 0501. Reason for this is that the 460 case is slightly longer than the 440/660/064/066 case. I haven't seen a factory outer 'small' spike but I have used the dual smaller dawgs from the 041/032 on an 046 with success. Some mild adjustment of the mounting holes on the outer dawg was needed.

 

[micah5634]

I went ahead and ordered the bike spike kit with ceramic chain catcher do i remove the factory chain catcher??

 

[Trigger-Time]

I went ahead and ordered the bike spike kit with ceramic chain catcher do i remove the factory chain catcher??

I did.........think most do.

 

[Lakeside53]

It will break off soon enough....:greenchainsaw:

 

[micah5634]

do you just remove it and put the bolt back in? someone said something about installing buffer 11226408300

 

[Lakeside53]

Yes... just remove and reinsert bolt...

 

[Tzed250]

.


I put the bumper strip on my 660...

.