DG2244 Dec 14, 2008 DG2244 ArboristSite Operative Joined Nov 30, 2007 Messages 313 Location Northeast Dec 14, 2008 #1 Will the piston ring for a Jonsered 2171 fit a Jonsered 70E? I believe both are 50mm X 1.5mm.
chewyone Dec 14, 2008 C chewyone ArboristSite Lurker Joined Nov 29, 2008 Messages 26 Location minnesota Dec 14, 2008 #2 i got a excelent cond 70E and a 49sp with good comp and spark just needs a little carb work. wanna barter for your 460?
i got a excelent cond 70E and a 49sp with good comp and spark just needs a little carb work. wanna barter for your 460?
PB Dec 14, 2008 PB Addicted to ArboristSite Joined Jul 26, 2007 Messages 7,791 Location You can't escape yourself Dec 14, 2008 #3 Here is a ring. I have a few of them in my saws and seem to be holding up. I haven't used one on a 70E but if the measurements you have are correct they should work. http://cutterschoice.com/cgi-bin/st...tegory_id=&find_keyword.x=31&find_keyword.y=9 part # 44209
Here is a ring. I have a few of them in my saws and seem to be holding up. I haven't used one on a 70E but if the measurements you have are correct they should work. http://cutterschoice.com/cgi-bin/st...tegory_id=&find_keyword.x=31&find_keyword.y=9 part # 44209
DG2244 Dec 14, 2008 DG2244 ArboristSite Operative Joined Nov 30, 2007 Messages 313 Location Northeast Dec 14, 2008 #4 Thanks for the link to Cutter’s Choice. I might give them a try.
albert Dec 14, 2008 A albert Addicted to ArboristSite Joined Feb 7, 2008 Messages 1,572 Location s.e pa. Dec 14, 2008 #5 I used the husky 50mm husky ring from baileys. woodland pro aftermarket comes in a 2pack