What is the stroke on a Dolmar
92cc 6400?
- Thread starter jar944
- Start date
Help Support Arborist Forum:
nmurph
ArboristSite.com Sponsor
37mm
He just replied it's not a Dolmar cylinder.
I replied that he gave me the bore, I know the stroke, the rest is math.
He just replied it's not a Dolmar cylinder.
I replied that he gave me the bore, I know the stroke, the rest is math.
54*54*37*.7854=84.7383768
Long ways from 92 in saw terms
Long ways from 92 in saw terms
nmurph
ArboristSite.com Sponsor
His reply-
That is true neil! The motor is been poor polished and like I said it's not the Dolmar cylinder that's all I can say without revealing all my secrets if you like a great lightweight saw with tons of power this is a saw call me we can talk thanks Scott
That is true neil! The motor is been poor polished and like I said it's not the Dolmar cylinder that's all I can say without revealing all my secrets if you like a great lightweight saw with tons of power this is a saw call me we can talk thanks Scott
Mastermind
Work Saw Specialist
I make 7.1 HP on an 77cc MS461.
Just sayin.
Just sayin.
cus_deluxe
Commie Satan turd
anyone else alarmed at the 10 tooth sprocket?! My guess is that thing would be a turd with a 28" bar
nmurph
ArboristSite.com Sponsor
The seller claims to have had the saw on a dyno.
cus_deluxe
Commie Satan turd
I wouldnt doubt the 7hp claim as much as i would wonder about what that sprocket would do to performance. A lot of guys on here way more experienced than me urge guys to not use anything other than 7-pin unless your into strong ported 85cc saw, and then only an 8-pin. A good work saw is miles from a "hotsaw".
watsonr
Addicted to ArboristSite
I'm wondering if I put Sugi bars on all my saws, the value will go up $500? That saw would probably do an 8 pin with a 20" bar, but a 28" bar and that 10 pin... no
SCTREEGUY
ArboristSite Operative
I messaged him on eBay about a month ago with some of the same questions but never got a response. The price has gone up considerably since then.
Adirondackstihl
Flyz, Fuel & Fotos
Some dumb fvckhead will buy it
Adirondackstihl
Flyz, Fuel & Fotos
Google street view.
Appears to be a nursery with firewood biz out back.
Mums the word
I'm wondering how the oiler will keep up, since mine will barely oil a 28" with a 7 pin.
Who's gonna buy this thing and tear it apart?
SteveSS
Addicted to ArboristSite
I see what you did there.
http://townofeasthavenct.org/pdf/purchasing/bids/bid13-11-TreeRemoval-bids.pdf
apparently this guy does a little bit of everything. here is a bid sheet for tree removal
apparently this guy does a little bit of everything. here is a bid sheet for tree removal
SCTREEGUY
ArboristSite Operative
Guess we know who got that job. Although I'd be a little concerned about that much price difference.we are working on a dot contract right now that I won by 150 bucks. Literally right now I'm sitting in the truck following on of the bucket trucks.
watsonr
Addicted to ArboristSite
Chain moving that fast should be slinging the oil off. With a 10 pin rim, the saw will have a hard enough time just keeping the chain on the bar, let along cutting with it.
IMO the tail mount on the d009 bar would have to be modified to run a 10T without the 50/50 chance of flying off. I had 084 with big stihl mount bars, 10T and you would be iffy to get 3 cuts in small wood. 9T no problem. 10T up work on bar mount.
