Hey guys, I need help finishing my heating system. I'm trying to get the heat setup correctly because right now all I have is the owb as heat. I have a Honeywell 9000 wifi T stat, hardy heater set as my first stage of heat, I have an lp furnace as the second stage but I can't keep it from coming on as soon as the first stage comes on. Hopefully someone has a similar setup that can help me figure it out. Most ac guys around here have never messed with a owb.
I'd like to be able to operate the ac, owb, and propane off the same T stat. I'd like the owb as the 1st stage as primary heat and the 2nd stage to be lp and only come on as emergency heat if the owb runs out of wood or has a problem during the middle of the night(come on about 30 minutes of no increase in temperature from stage 1).
Any help is greatly appreciated.
I'd like to be able to operate the ac, owb, and propane off the same T stat. I'd like the owb as the 1st stage as primary heat and the 2nd stage to be lp and only come on as emergency heat if the owb runs out of wood or has a problem during the middle of the night(come on about 30 minutes of no increase in temperature from stage 1).
Any help is greatly appreciated.