cuinrearview
Red saw lover
You should have gotten in on the Jonsered 2166s on Ebay. Heck, you'd still come out ahead of those prices. With a minimal amount of work it's a 372XP in red.
Odd because the cs620 usually comes with a 27"update: called to a few dealers and husqvarna and echo told me that getting the saw with a 28" adds around 150 bucks (except shindaiwa that has a 28" from factory) the cons on the sindaiwa ...it weights a little more than the husky and that is important since i am weight around 165 pounds.
Prices are:
Husky 372xp with 28" bar 875 USD
Echo 680 with 28" bar 850 USD
Shindy 757 with 28" bar 700 USD.
Next week i will visiting all 3 dealers to check how the saw feels in my hand..and meke sure the husky is made in sweeden and not in brazil.
Thanks so much for all the advices and inputs ..now its time to take the old 446 and cut some wood
I've owned two CS-670's and a CS-6700. None of them were overly impressive anyplace but very well built saws and dead solid reliable. To this day I'm not sure why Echo hasn't hit the 70cc market with a much better design based off the CS-620PW.
I would probably still have at least one of the CS-670's but if you have a 268XP at your disposal you'll never find yourself reaching for a one.......FWIW.......Cliff
Thanks Guys. I´ve finally went with the shindaiwa 757, the husky was beautiful but it cost more, and i needed with a bigger bar (came with 20") which will cost even more, also i have a dealer really close to home, and the third reason was..i have to be honest..i love shindaiwas. I was really busy this week and i have tested only one time for a few minutes and i must say..it´s a best. .
Enter your email address to join: