SteveSr
Addicted to ArboristSite
Hello,
I am looking for an alternate source for the duckbill in the following photos:
The large to diameter is 0.475" (12.07mm)
The mating hole diameter is 0.180" (4.57mm)
Keep in mind that this one may have swelled or shrunk due to age and fuel exposure.
These were used in Stihl gas caps as vents as well as some chainsaw tank vents. It may also have been used in some old Walbro primer bulb carburetors.
I believe that these are still available from Stihl but for $10 each!
Does anyone recognize these and have a less expensive source?
Thanks,
Steve
I am looking for an alternate source for the duckbill in the following photos:
![IMG_6299.JPG IMG_6299.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/373/373469-d2b44fc0d7fb78e7bfcbddb1c00808ed.jpg)
![IMG_6300.JPG IMG_6300.JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/373/373470-d6d7839e7caf041c248f072ac4d86d9b.jpg)
The large to diameter is 0.475" (12.07mm)
The mating hole diameter is 0.180" (4.57mm)
Keep in mind that this one may have swelled or shrunk due to age and fuel exposure.
These were used in Stihl gas caps as vents as well as some chainsaw tank vents. It may also have been used in some old Walbro primer bulb carburetors.
I believe that these are still available from Stihl but for $10 each!
Does anyone recognize these and have a less expensive source?
Thanks,
Steve