another muff mod ?

[catmanzr440]

Did my first MM last night on my 365, how far should i back out the H screw or whats a good rule of thumb.

 

[blsnelling]

Did my first MM last night on my 365, how far should i back out the H screw or whats a good rule of thumb.

It doesn't work like that. You have to "tune" saw. The L needle will need adjusted as well.

 

[Guido Salvage]

This is what Brad is speaking of. However, you need to match the ohms to the saw size, thus the different forks.

From experience C sharp would be about right on that saw...

 

[catmanzr440]

Put the saw in some wood today, Im impressed with the gains in torque. as far as carb setting i just richened it till it sounded fat then back till it cleaned up, hows that sound?

 

[catmanzr440]

only about 1/2 turn out or so.

 

[Log Hogger]

I hope you mean you leaned it out until it cleaned up in the wood.

Madsen's has a good tutorial on saw tuning, that's how I finally learned to properly tune a two-stroke.

 

[Opihi59]

Tuning Tutorial

I hope you mean you leaned it out until it cleaned up in the wood.

Madsen's has a good tutorial on saw tuning, that's how I finally learned to properly tune a two-stroke.

Is there any chance you could post up a link to that reference? A ton of us out here would really appreciate the knowledge.

 

[Gizzard]

Is there any chance you could post up a link to that reference? A ton of us out here would really appreciate the knowledge.

Here is that Madsen saw tuning link
Saw Carb Tuning

 

[catmanzr440]

good read right there, that should help some of us out. thanks for posting.

 

[watsonr]

I believe this one is better, I can hear what he's talking about and hear the 4-stroke sound better than the Maddens video.

http://www.arboristsite.com/chainsaw/113538.htm