toddstreeservic
ArboristSite Guru
Hey guys i'm try to put a new fuel tank on my 028. I am having trouble connecting the fuel line and the boot. Are there any tricks or do I just need a longer pair of needle nose pliers?
any trick to connecting fuel line on 028
- Thread starter toddstreeservic
- Start date
Help Support Arborist Forum:
Make the connections before you install the screws in the AV mounts, it gives you a bit of room to work on the clamp screws and the gas line.
Pioneerguy600
Lakeside53
Stihl Wrenching
Fuel line: Just grab it and stretch it out to the inlet and attach filter.
Boot - attach to the cylinder first. Make sure the tab or the seam of the boot is allgned to the bottom of the inlet. Put two turns of string around the boot end, feed string though the tank hole, and gently pull it on. Takes 5 seconds... DON'T probe with a screwdriver or pull with pliers!
Boot - attach to the cylinder first. Make sure the tab or the seam of the boot is allgned to the bottom of the inlet. Put two turns of string around the boot end, feed string though the tank hole, and gently pull it on. Takes 5 seconds... DON'T probe with a screwdriver or pull with pliers!
Similar threads
