Anyone game for a show your videos thread?

[CHEVYTOWN13]

Nate, it pulled good. That piece of Canyon Oak is 4 years down and rock hard.

I agree, too bad there isn't a large round of Piñon Pine around

Hard wood wood be laborious for sure. But that's what a 79er is fer from what I hear:smoking:

 

[Metals406]

Nate, it pulled good. That piece of Canyon Oak is 4 years down and rock hard.

I agree, too bad there isn't a large round of Piñon Pine around

Hard wood wood be laborious for sure. But that's what a 79er is fer from what I hear:smoking:

You sir, are hooked. . . You will be as bad as me soon, and your wife will want to choke you.

Let's see here, I have one, two, three, four, five chainsaws sitting in the bedroom right now.

I must keep them warm and safe from the cold and snow. LOL

 

[CHEVYTOWN13]

LOL. The piped 5100 earned me the dog house homes! I wonder how loud the 6401 will be on pipe:greenchainsaw:

Yeah bro, I'm in and there's no way out. "Let's go get it!"<--that gator dude from Ax Men is freaking nuts, but dang is he fuuuuuunny!

 

[Metals406]

LOL. The piped 5100 earned me the dog house homes! I wonder how loud the 6401 will be on pipe:greenchainsaw:

Yeah bro, I'm in and there's no way out. "Let's go get it!"<--that gator dude from Ax Men is freaking nuts, but dang is he fuuuuuunny!

I don't have satellite anymore, but I've heard swamp logger dude is crazy.

I wonder if your wife will let you run the pipe in the house? :monkey:

LOL

I've ran saws in the house. . . But not while the wife was home.

 

[CHEVYTOWN13]

Bro, she's about to kick me onto skidrow! The pipe for the 6401 just might earn me a trip there:hmm3grin2orange:

 

[CHEVYTOWN13]

15 more minutes!

I forgots, I need to post it here too:greenchainsaw:

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid701.photobucket.com/albums/ww11/CHEVYTOWN/VIDS/3inchbaffle.flv">

 

[CHEVYTOWN13]

15 more minutes of fame for a 50cc pulling a 3/8 8 pin rim--on pipe of course

Same log as above. Did not sharpen square chisel chain.

Above vid is the 3/8 7 pin and this vid is 3/8 8 pin. I think the 8 nipped it by a 1/10 or two:smoking:

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid701.photobucket.com/albums/ww11/CHEVYTOWN/VIDS/88pinCanyonOakSquarechisel.flv">

 

[CHEVYTOWN13]

Under California's Gold

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/pXmY2rW46R0&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/pXmY2rW46R0&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[Andyshine77]

Looks warm, still have 8" of snow on the ground.

 

[CHEVYTOWN13]

There's been a lot of talk about 5100's going south.

Today, I had to slap on the pipe to feel good about it:greenchainsaw:

Running the 3/8 8 pin rim on some Canyon Oak.

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid701.photobucket.com/albums/ww11/CHEVYTOWN/VIDS/CHEVYTOWN/Piped5100.flv">

 

[scotclayshooter]

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/9BVKnfzRTpU&hl=en_GB&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/9BVKnfzRTpU&hl=en_GB&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/hRtHViRCmfE&hl=en_GB&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/hRtHViRCmfE&hl=en_GB&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/3UTDBQ-N82o&hl=en_GB&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/3UTDBQ-N82o&hl=en_GB&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[CHEVYTOWN13]

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid701.photobucket.com/albums/ww11/CHEVYTOWN/Piped365Special.flv">

 

[CHEVYTOWN13]

Finished porting on the 5100 motor. Initial start up after porting. Not a very sharp chain, but it done good.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/-VEyKvOOEK4?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/-VEyKvOOEK4?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[Metals406]

Finished porting on the 5100 motor. Initial start up after porting. Not a very sharp chain, but it done good.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/-VEyKvOOEK4?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/-VEyKvOOEK4?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

Still 4-stroking in the video. . . You cutting more of that California Concrete Bush?

 

[CHEVYTOWN13]

It's Elm Nate. And I'll tell you what, the bark is the terminator! It chews up the chains quick.

But to start off with, it was a work chain and not very sharp as far as the corners go. I did file it though.

 

[CHEVYTOWN13]

Jimmy sure knows what's up.

This motor was built to pull a long bar, but I had to try

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/Gcnn7EQchAY?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Gcnn7EQchAY?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

Cuttin' at almost 6000' full comp LGX.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/5gDlHmQkcSk?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/5gDlHmQkcSk?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

Also at nearly 6000'.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/pYmdzIKurMg?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/pYmdzIKurMg?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>